1
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
VOL.
23
 NO.
1
JANUARY / JULY 2026
RNPS: 0514 ISSN: 2224-6274
Scientic-Technical Journal of the
Telecommunications Company of Cuba S.A.
Contact us
Scientic and Technical Surveillance and Information Division, ETECSA
Adress:
Centro de Negocios Miramar, calle 3ra, e/ 76 y 78, Edicio Beijing,
4to Piso, ocina 404. Playa, C.P
.: 11300. La Habana, Cuba.
Phone :
(53) 7266-8453
Email:
tono@etecsa.cu
Website:
www.revistatonoetecsa.cu
Tono,
Scientic-Technical Journal of the
Telecommunications Company of Cuba S.A.
The opinions expressed by the authors in the articles
reect their own points of view and do not necessarily
coincide with the criteria of the editorial board.
All research articles in this publication have undergone a
rigorous double-blind peer review.
RNPS: 0514
ISSN: 2224-6274
Scientic-Technical Journal
Biannual Publication
Vol.23
-
No. 1
-
2026
Cover:
Internet
Scientic Advisory Committee
Melissa Saltiel Delgado, M.Sc.
Mirta Julieta García García, M.Sc.
María del Pilar Caso Álvarez, M.Sc.
Alberto García García, M.Sc.
Fidel Mirabal Puig, M.Sc.
Editorial Board
Journal Director
Grisel Ojeda Amador, M.Sc.
Executive Editor
Inés María León Martínez, B.A.
Section Editor
Mirta Ulloa Ferreiro, B.A.
Translation
Armando Camejo Hernández, B.A.
Lena María cué Morales, B.A.
Frans Carlos Castellano Caballero, B.A.
Odalys Ojeda Fuentes, B.A.
Idalmis María Barbería Espinosa, B.A.
Alejandro Daniel Fadragas Robaina, B.A.
Original Design
Marcel Mazorra Martínez, B.A.
Layout
Isabel Canales Calvo, B.A.
Technical support and programming
Maritza de la C. Menéndez Figueredo, Eng.
Data review
Elisa María Alfaro Díaz, B.A.
Darian Díaz García, Eng.
Referees
Caridad Anías Calderón, Ph.D. (CUJAE)
Félix Álvarez Paliza, Ph.D. (UCLV)
Glauco Antonio Guillén Nieto, Ph.D. (LACETEL¹)
José Raúl Vento Álvarez, Ph.D. (UPR²)
Osvaldo Andrés Pérez García, Ph.D. (CENATAV³)
Lindsay Alonso Gómez Beltrán, Ph.D. (Univ. Camagüey
4
)
Gregory Randall, Ph.D. (Univ. de la República, Uruguay
5
)
María Matilde García Lorenzo, Ph.D. (UCLV)
Jorge Gulin González, Ph.D. (UCI)
Omar Correa Madrigal, Ph.D. (UCI)
Arelys Emiliana Ramos Fleites, MSc. (UCLV
6
)
Alberto Javier García García, M.Sc. (ETECSA)
Raúl E. Rodriguez Doncel, Eng. (CONAS)
Fidel Mirabal Puig, M.Sc. (ETECAS)
Armando Tito Bernot, M.Sc. (ETECSA)
Pablo Domínguez Vázquez, M.Sc. (ETECSA)
Maydel Vázquez Fernández, M.Sc. (ETECSA)
Karina Leonor Fernández Sánchez, M.Sc. (ETECSA)
1*
LACETEL: Instituto de Investigación y Desarrollo de las Telecomunicaciones
(Telecommunications Research and Development Institute)
2
UPR: Universidad de Pinar del Río “Hermanos Saíz Montes” (University of Pinar
del Río “Hermanos Saíz Montes”)
³ CENATAV: Centro Nacional de Aplicaciones Tecnológicas Avanzadas
(Advanced Technologies Application Center)
 Universidad de Camagüey: (University of Camagüey)
 Universidad de la República de Uruguay: University of Uruguay
 UCLV: Universidad Central “Marta Abreu” de Las Villas (Central University
"Marta Abreu" of Las Villas)
4
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
E
D
I
T
O
R
'
S
L
E
T
T
E
R
We are pleased to present this issue of Tono journal, which
compiles notable contributions in the elds of science and tech
-
nology. This selection provides an up-to-date overview of the
advances and challenges in digital security, technology manage-
ment, and process transformation—priority areas for the coun-
try’s sovereign development and eciency.
Digital
security
and
infrastructure
modernization
are
key
comprehensive themes in today’s context. The studies included
in this compilation range from an analysis of vulnerabilities in
TM Forum’s Open API to the protection of mobile devices, con-
rming the need for holistic strategies to address increasingly
sophisticated threats. Likewise, in this compilation, experiences
with technological integration in strategic sectors such as Cuba’s
biopharmaceutical supply chain, where the shift toward Inven-
tory 4.0 models shows the impact of digitization on operational
strength, are examined.
Technology
management
practices
in
the
national
context
are characterized by a systemic and applied approach. The doc-
umented
proposals
present
solutions
that
balance
innovation
with practical sustainability, such as extending the Tier model
from the data center to the service, conducting digital securi-
ty maturity assessments for consulting services, and developing
IT systems to evaluate the impact of information technologies
on organizations. Notable progress has been made in areas such
as infrastructure standardization, the measurement of organiza-
tional development, and the creation of management tools tai-
lored to the country’s specic conditions.
5
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
E
D
I
T
O
R
'
S
L
E
T
T
E
R
Publishing Team
Tono Scientic-Technical Journal
The ndings of the event conrm the need to maintain an
approach that combines technical improvement with institu-
tional capacity building. It is evident that the effectiveness
of digital transformation strategies requires both advanced
technological
solutions
and
professionals
well-prepared
to
implement them in accordance with criteria of eciency and
technological sovereignty, as reected in initiatives such as
Girasol
Tecnológico,
which
contribute
to
the
visibility
and
strengthening of the national digital ecosystem.
A new feature in this issue of Tono journal is the paper "The Ar-
ticial Intelligence Revolution in Telecommunications," present
-
ed at the 2025 Scientic Conference organized by the “Vladimir
Ilich Lenin” Pre-University Vocational Institute of Exact Scienc
-
es and Empresa de Telecomunicaciones de Cuba S.A. (ETECSA,
in Spanish). This work shows not only the vast knowledge of Cu-
ban young people but also their interest in exploring new topics
such as the use of AI.
This compilation proves the level of specialization and ma-
turity
achieved
by
this
knowledge
community
in
Cuba.
We
appreciate the collective contribution of researchers and pro-
fessionals whose work helps strengthen the foundations for
secure, ecient, and reliable national digital development.
Sincerely,
6
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
7
26
40
56
93
83
67
RESEARCH
Threats and Vulnerabilities in TM Forum Open APIs
Clayret Echenique Quintana, Eng. and Jorge Manuel Sotolongo Piedra, Eng.
From Data Center to service: extending the Tier Model
Ernesto Carrazana Ruiz, Eng., Irisleidis Lázara Casi Estevanell, Eng.,
and Héctor Manuel Jacas Joa, Eng.
Technological sunower
Lázaro Santana Linares, Eng., Maikol Ismael Mirabal Hidalgo, Eng.,
and Raydel García Mesa, M. Sc.
Towards Inventory Management 4.0: Integration of Digital
Technologies in Cuba’s Biopharmaceutical Supply Chain
Zuleyka Calzado Mesa, M. Sc., Gabriela Ojeda de la Paz, Eng., and Damián
Aldait García Pérez, Eng.
Digital Security Maturity Assessment for Consulting Services
Noel Emilio Rojas Martos, M. Sc., and Liban de Armas Granado, M. Sc.
The AI Revolution in Telecommunications: A Journey from the
Past to the Future
Rafael Alberto Noa Yanes, and Ivette García Montero, Eng.
Computer system for evaluating the impact of Information
Technologies in organizations
Ernesto Elias Elzaurdín Valdés, Eng., Meliza Leon Bencomo, Ts.,
and Marynelsa Bonne Cuza, M. Sc.
TABLE OF CONTENTS
VOL.
23
NO.
1
JANUARY / JULY 2026
7
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
Received: 01/2026 | Accepted: 03/2026 | Published: 07/2026
1*
University of Computer Sciences. Carretera a San Antonio de los Baños, Km 2 ½,
reparto Torrens, municipio Boyeros, La Habana, Cuba. cechenique@uci.cu
2
University of Computer Sciences. Carretera a San Antonio de los Baños, Km 2
½, reparto Torrens, municipio Boyeros, La Habana, Cuba. jorgemsp@uci.cu
Abstract
Telecommunications sector faces distinctive cybersecurity chal-
lenges arising from its migration to cloud-native architectures and its
role as a central axis of the digital environment. In this context, TM
Forum's Open APIs, which materialize the ODA architecture princi-
ples, constitute a signicant attack surface by enabling interoperabil
-
ity between decoupled systems. This research aimed to identify and
analyze the main threats and vulnerabilities aecting these interfaces,
in order to contribute to the design of future security frameworks. A
systematic literature review methodology based on the PRISMA proto
-
col was employed, with searches conducted across six databases: IEEE
Xplore, Scopus, Web of Science, Google Scholar, ResearchGate, and
ScienceDirect and additional ocial sources. From the identied re
-
cords, 7 studies were included after applying inclusion and exclusion
criteria. As the main contribution, a correlation taxonomy was con-
structed integrating STRIDE+P categories, OWASP API Top 10 2023
vulnerabilities,
and
ODA
architecture
components,
identifying
17
signicant correlations. The results reveal that 47% present Critical
pp. 7 - 25
R
E
S
E
A
R
C
H
Threats and Vulnerabilities in TM
Forum Open APIs
Clayret Echenique Quintana, Eng.
¹*
Jorge Manuel Sotolongo Piedra, Eng.
²
8
Threats and Vulnerabilities in TM Forum Open APIs
Clayret Echenique Quintana, Eng. and Jorge Manuel Sotolongo Piedra, Eng.
pp. 7 - 25
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
severity, concentrated in the API Gateway, customer management,
and access control. It is concluded that the security of these APIs
requires
granular
authorization
controls
and
eld-level
schema
validation, providing an empirical foundation for specic security
frameworks in ODA ecosystems.
Keywords:
Threats in Open API, ODA, Open API, TM Forum Open
APIs, Open API Security
Introduction
Telecommunications sector faces distinctive cybersecurity chal-
lenges due to its role as a central axis of the digital environment. Ser-
vice providers are particularly vulnerable to cyber threats arising from
geopolitical tensions, including espionage and other malicious activ-
ities. They also face technological risks inherent to their migration to
cloud-native architectures, which are less well known and represent
a threat to both new and legacy network services (Donegan, 2023). In
this context, standardization and the adoption of open architectures
emerge
as
fundamental
pillars
for
innovation
and
interoperability.
TM Forum has been a pioneer in developing reference frameworks
and best practices to guide this evolution (TM Forum, 2025a).
Among its most signicant contributions is the Open Digital Ar
-
chitecture (ODA) reference framework, conceived as an architectur
-
al model based on decoupled and reusable components for building
agile business ecosystems. To complement this vision, TM Forum's
Open APIs materialize the principles of the ODA implementation lay-
er by providing a standardized set of technical specications that
enable seamless, secure, and scalable integration between systems,
platforms, and partners across the digital ecosystem.
The
growing
use
of
APIs
(Application
Programming
Interfaces)
in the telecommunications sector has facilitated the creation of new
products, especially with the rise of cloud services and mobile appli-
cations. However, this openness introduces signicant vulnerabili
-
ties that can be exploited by malicious actors.
According to the State of API Security H2 report in 2025, the main
API security problems are due to the fact that 80% of security leaders
9
Threats and Vulnerabilities in TM Forum Open APIs
Clayret Echenique Quintana, Eng. and Jorge Manuel Sotolongo Piedra, Eng.
pp. 7 - 25
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
lack continuous real-time monitoring; 33% of organizations suered
a security incident due to APIs in the last year; only 19% are condent
in the accuracy of their API inventory; and 51% of organizations are
still in planning stages or at basic levels in their API security maturity
(Salt, 2025).
In this context, TM Forum Open APIs emerge as a fundamental
standard driving integration and the creation of an interconnected
service ecosystem in the telecommunications sector. These program-
ming interfaces not only facilitate connectivity and interoperability
between complex services, but also enable comprehensive lifecycle
management, even in environments where multiple partners collab-
orate in service delivery.
Based on the REST design principles and being technologically
independent, TM Forum Open APIs have become the basis for simple
and consistent service management. But this standardization, while
essential for innovation, also extends the reach of the aforementioned
vulnerabilities; therefore, the security of these APIs becomes a criti-
cal pillar for the reliability and sustainability of the digital ecosystem.
For this reason, this research aims to systematize the main threats
and vulnerabilities to which TM Forum Open APIs are exposed, in
order to contribute to future research on the conception of security
frameworks that integrate best practices and security standards for
TM Forum Open APIs.
Materials and Methods
This research is based on a systematic literature review aimed at
identifying, analyzing, and synthesizing the current state of threats
and vulnerabilities in TM Forum Open APIs. To ensure methodolog-
ical rigor in the document selection and analysis process, the PRIS
-
MA protocol was adopted. A search was conducted in six scientic
databases and academic repositories, selected for their coverage in
computer engineering, telecommunications, and cybersecurity: IEEE
Xplore, Scopus, Web of Science, Google Scholar, ResearchGate, and
ScienceDirect.
10
Threats and Vulnerabilities in TM Forum Open APIs
Clayret Echenique Quintana, Eng. and Jorge Manuel Sotolongo Piedra, Eng.
pp. 7 - 25
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
The search strategy was structured by combining controlled and
free terms in English and Spanish, using Boolean operators (AND, OR,
NOT) and truncations. Three thematic blocks were designed:
1.
API and security: "API security" OR "API vulnerability" OR "API
threat" OR "Open API security" OR "API risk"
2.
TM Forum / ODA: "TM Forum" OR "Open Digital Architecture"
OR "ODA" OR "Open API TM Forum" OR "TMF Open API"
3.
Threats
and
vulnerabilities:
"threat
modeling"
OR
"STRIDE"
OR "OWASP API Top 10" OR "cybersecurity" OR "vulnerability
assessment" OR "risk assessment"
Table 1 establishes the inclusion and exclusion criteria for study
selection:
Table 1.
Inclusion and exclusion criteria for study selection
The document selection was conducted in three phases, following
the PRISMA ow (see Figure 1):
Phase
1
–
Identication:
Searches
were
executed
in
the
six
databases, recording the number of results per source and removing
duplicates
using
the
Zotero
reference
manager
and
manual
cross-
checking.
Phase 2 – Screening: Titles and abstracts were evaluated against
inclusion/exclusion criteria.
Phase 3 – Inclusion: Full texts of pre-selected documents were
retrieved. The inclusion/exclusion criteria were reapplied to the full
content, recording reasons for exclusion. The nally included docu
-
ments were subjected to data extraction.
11
Threats and Vulnerabilities in TM Forum Open APIs
Clayret Echenique Quintana, Eng. and Jorge Manuel Sotolongo Piedra, Eng.
pp. 7 - 25
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
Figure 1.
PRISMA Flow Diagram for Document Selection
Then, the following analytical methods were applied:
Document
analysis:
Review
of
ocial
TM
Forum
documenta
-
tion, OWASP standards, NIST SP 800-53/63/228, and selected
academic literature.
Analysis and synthesis: Interpretation, processing, and cate-
gorization of extracted information, establishing relationships
between threats, OWASP API Top 10 vulnerabilities, and rec
-
ommended security controls.
Discussion and Results
An API is a set of rules and denitions that dictate how one soft
-
ware can interact with another. It acts as an intermediary that facili-
tates dierent software systems to communicate and exchange data
seamlessly and in a standardized manner (Akintoye, 2025). For exam
-
ple, from a more technical and functional perspective, especially in
12
Threats and Vulnerabilities in TM Forum Open APIs
Clayret Echenique Quintana, Eng. and Jorge Manuel Sotolongo Piedra, Eng.
pp. 7 - 25
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
the context of the web, APIs are the mechanism that enables multiple
applications to share data and interact through structured HTTP re-
quests (Akintoye, 2025). During the evolution of web services, APIs
emerged to meet the demands of seamless connectivity and rapid
data exchange (Jaiswal, 2025).
Among the essential functions of an API in modern software ar-
chitecture are (Akintoye, 2025; Garimilla, 2024):
Promoting eciency: Allow developers to integrate existing sys
-
tems rather than building everything from scratch, saving time
and resources.
Enabling connectivity: Make it possible for systems built with
completely dierent technologies and platforms to work togeth
-
er.
Driving innovation and modularity: Oer tools to build creative
solutions
and
compartmentalize
functionalities,
making
soft-
ware more exible, scalable, and maintainable.
Accelerating development: By simplifying integration, they re-
duce complexity and development cycles.
APIs use the Simple Object Access Protocol (SOAP) for its robust
-
ness, security, and standardization, especially in complex business
environments. This is the oldest and most rigid protocol, based on
XML
messaging.
It
is
characterized
by
strict
communication
stan-
dards, formalized contracts, and robust security features, being com-
mon in enterprise-level applications. However, its complexity often
slowed down development (Akintoye, 2025; Jaiwal, 2025).
SOAP is largely considered a legacy technology, and the digital
ecosystem has experienced a clear evolution from SOAP toward REST
architectures. This transition was driven by the need for more agile,
lightweight, and scalable solutions, especially with the rise of mobile
applications and cloud services. Its key principles are the use of stan-
dard HTTP methods (GET, POST, PUT, DELETE); stateless communi
-
cation, where each request contains all the necessary information to
be processed; the use of lightweight data formats, particularly JSON;
and it is highly scalable and simpler to implement (Akintoye, 2025;
Jaiswal, 2025).
13
Threats and Vulnerabilities in TM Forum Open APIs
Clayret Echenique Quintana, Eng. and Jorge Manuel Sotolongo Piedra, Eng.
pp. 7 - 25
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
Currently, GraphQL is cited as an emerging trend and as an alter-
native to REST, since its main advantage is exibility: it allows clients
to request only the data they need, avoiding information overload
(Jaiswal, 2025). To obtain and handle data, RESTful APIs are orga
-
nized around two fundamental concepts (Akintoye, 2025):
1.
Resource: It is the central object. A resource represents any
data or object that can be accessed or manipulated, such as a
user, a product, a post, or a book. Each resource is identied by
a unique URI, which is the address to access it.
2.
Endpoint: It is the specic URL where a resource can be ac
-
cessed to perform an operation. An endpoint combines the serv-
er's base URL, the resource path, and an HTTP method to dene
an action.
Interaction occurs when a client sends a request to an endpoint,
and the server returns a representation of the resource, commonly in
JSON format.
Today, the role of APIs in web, mobile, and Software as a Service
(SaaS) applications is to be the backbone that sustains modern ap
-
plications.
The
evolution
toward
microservices
architectures
and
cloud-native applications was driven by RESTful APIs. APIs allow de
-
coupling system components, making it easier for dierent teams to
develop and deploy them independently. In the cloud environment,
RESTful APIs are ideal because they consume fewer computational
resources and simplify horizontal scaling on platforms like Kuber-
netes. In contrast, mobile applications require fast and ecient data
exchange to oer a good user experience. RESTful APIs, with their
lightweight data (JSON) and lower latency, are much more suitable
for this purpose (Jaiswal, 2025).
TM Forum Application Programming Interfaces
TM Forum Open APIs are the mechanism that allows all ODA blocks
and components to connect and function as a unied and stable sys
-
tem (Hou et al., 2024; TM Forum, 2021a).
ODA is TM Forum's reference architecture framework, designed to
replace monolithic systems with a collection of decoupled software
14
Threats and Vulnerabilities in TM Forum Open APIs
Clayret Echenique Quintana, Eng. and Jorge Manuel Sotolongo Piedra, Eng.
pp. 7 - 25
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
components. Its main objective is to enable Internet service provid-
ers to operate as agile digital enterprises, similar to large technology
companies (Hou et al., 2024; TM Forum, 2021a).
TM Forum Open APIs have a RESTful API architectural style in
JSON format dened with OpenAPI Specications (OAS) and are used
for the orchestration and management of services and resources be-
tween Business Support Systems and Operations Support Systems
(BSS/OSS) (TM Forum, 2025b). These fulll two essential functions
within the ODA (TM Forum, 2021a):
Standardized component interfaces: They dene the reference
interfaces
through
which
ODA
components
(residing
in
func
-
tional blocks) expose their functionalities externally and com-
municate with each other. This API exposure approach is what
allows the architecture to be platform-based and encourages ag-
ile evolution.
Interoperability enabler: By being standardized, the APIs allow
components from dierent providers or internal, proprietary, or
legacy systems to connect and work together, drastically reduc-
ing integration complexity and cost.
The success of Open APIs lies in the fact that they are not just tech-
nical interfaces, but are anchored to TM Forum reference frameworks.
Each Open API is based on a business information object dened in
TM
Forum's
Information
Framework
(SID).
This
common
semantic
foundation ensures that, regardless of the provider, the business con-
cept exchanged is consistent and universal. Furthermore, they map
the functions of ODA blocks to business processes dened in eTOM,
ensuring that the interfaces support end-to-end business workows
(V. P. Mochalov et al., 2019; TM Forum, 2021).
In practice, Open APIs are essential for digital transformation,
especially in the areas of orchestration, automation, and virtualiza-
tion. In the context of an ODA implementation, the APIs are used to
interconnect the business management level with the network pro-
duction level, for example, to automate the provisioning of a con-
nectivity service.
15
Threats and Vulnerabilities in TM Forum Open APIs
Clayret Echenique Quintana, Eng. and Jorge Manuel Sotolongo Piedra, Eng.
pp. 7 - 25
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
Threats Exposing TM Forum Open APIs
The
document
IG1187
ODA
Enterprise
Risk
Assessment
v2.0
identies a set of relevant security threats by adopting the STRIDE+P
model, which encompasses the categories of spoong, tampering,
repudiation, information disclosure, denial of service, elevation of
privilege, and privacy risks. Each of these threats constitutes a crit
-
ical axis in the risk management of open platforms, as they com-
promise the condentiality, integrity, and availability of services, in
addition to regulatory compliance regarding personal data protec-
tion (TM Forum, 2021b).
In particular, spoofing relates to attacks where a malicious ac-
tor impersonates a legitimate user or system; tampering involves
the alteration of information in transit or at rest; repudiation re-
flects the absence of traceability and logging that allows denying
performed actions; and information disclosure corresponds to the
exposure of sensitive user or company data. Likewise, denial of
service seeks to interrupt resource availability through overload,
elevation
of
privilege
allows
an
attacker
to
obtain
unauthorized
access, and the privacy category emphasizes the risks of regula-
tory non-compliance, particularly in relation to the General Data
Protection Regulation (TM Forum, 2021b).
More specically for the context of TM Forum Open APIs, the doc
-
ument highlights that programming interfaces constitute the main
attack surface and recommends adopting as a reference the threats
described in the OWASP API Top 10 (2019). These include broken
object-level
authorization,
broken
authentication,
excessive
data
exposure, lack of resource or consumption control, broken func-
tion-level
authorization,
uncontrolled
attribute
mass
assignment,
insecure
congurations,
injection
vulnerabilities,
improper
asset
and version management, and lack of eective logging and moni
-
toring (TM Forum, 2021b).
Within this set, the most critical threats for TM Forum Open APIs
are those that directly impact authentication, authorization, and data
protection. In particular, excessive data exposure constitutes a cen-
tral risk by potentially revealing personal or condential information
16
Threats and Vulnerabilities in TM Forum Open APIs
Clayret Echenique Quintana, Eng. and Jorge Manuel Sotolongo Piedra, Eng.
pp. 7 - 25
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
beyond what is strictly necessary. Decient authentication and au
-
thorization facilitate improper access to sensitive objects or functions,
while the absence of consumption controls and version management
increases vulnerability to denial-of-service attacks. In this sense, TM
Forum's risk assessment framework shows that the security of Open
APIs depends on the combination of a structured threat analysis
under STRIDE+P and the systematic adoption of the best practices
proposed by OWASP for open APIs (Ariami
et al.
, 2024; Nikolov &
Aleksieva-Petrova, 2025; TM Forum, 2021b).
Vulnerabilities of TM Forum Open APIs
The most common vulnerabilities in TM Forum Open APIs coin-
cide with those described in the OWASP API Top 10 from 2019, ac
-
cording to IG1187 ODA Enterprise Risk Assessment v2.0; although
this guide references the 2019 list, the author will adopt the 2023 list,
which is the latest stable version (Mazzei
et al
., 2025; OWASP, 2023;
Sharma, 2025):
1.
Broken Object Level Authorization (BOLA): APIs often expose
object identiers that can be manipulated by an attacker.
2.
Broken Authentication: It occurs when authentication mecha-
nisms are not implemented securely.
3.
Broken Object Property Level Authorization: When an API re-
turns or allows modication of more elds than necessary, or
lacks per-eld controls, it can expose or alter sensitive data.
4.
Unrestricted Resource Consumption: If the API does not limit
the number, size, or frequency of requests, system performance
can
be
exhausted,
leading
to
denial-of-service
(DoS)
or
cost
overruns.
5.
Broken Function Level Authorization: It appears when admin-
istrative or high-privilege functions are not properly restricted.
Attackers can execute actions that should be reserved only for
certain roles.
6.
Unrestricted Access to Sensitive Business Flows: Even if there
are no technical vulnerabilities, attackers can abuse the busi-
ness logic exposed by the API.
17
Threats and Vulnerabilities in TM Forum Open APIs
Clayret Echenique Quintana, Eng. and Jorge Manuel Sotolongo Piedra, Eng.
pp. 7 - 25
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
7.
Server-Side Request Forgery (SSRF): It occurs when an API al
-
lows the user to indicate external or internal URLs without vali
-
dation, causing the server to make malicious requests.
8.
Security Misconguration: It includes errors in HTTP headers,
permissions, CORS policies, insecure versions, enabled debug
endpoints, or exposed keys.
9.
Improper Inventory Management of APIs: Organizations often
lose control of how many APIs have active, their versions, and
what data they access.
10.
Unsafe Consumption of APIs: When an application consumes
external APIs without verifying their authenticity, without val-
idating responses, or without controlling dependencies, it can
become a victim of attacks.
Many TM Forum APIs operate complex business ows, interoper
-
ability with third parties, multiple versions, and varied consumption
scenarios. Vulnerabilities such as unrestricted access to sensitive
business ows and unsafe consumption are especially pertinent. In
this case, there is no specic information indicating which of the
aforementioned vulnerabilities aect TM Forum Open APIs, so this
research
will
attribute
these
same
vulnerabilities
as
expressed
in
the OWASP Top 10 (Friman
et al
., 2023; V. Mochalov
et al
., 2019; V.
P. Mochalov
et al
., 2020; Smidovych & Davydovskyi, 2022).
Security and Management Policies for TM Forum Open APIs
Security in Open API implementation must be addressed under a
comprehensive approach that contemplates both design principles
and technical and management mechanisms. It is assumed that the
environment
is
hostile,
so
no
request
should
be
considered
trust-
worthy by default. For this purpose, every design, protocol, or API
must undergo a formal threat modeling and risk assessment process,
which allows identifying the attack surface and dening appropriate
mitigation measures (Ohtani
et al
., 2021; Ranjan
et al
., 2022; TM Fo-
rum, 2017).
A key aspect is the delimitation of trust boundaries, with min-
imization
of
interface
exposure
only
to
those
necessary
for
the
18
Threats and Vulnerabilities in TM Forum Open APIs
Clayret Echenique Quintana, Eng. and Jorge Manuel Sotolongo Piedra, Eng.
pp. 7 - 25
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
business, and applying a granular authorization model after robust
authentication.
Such
authentication
must
be
protected
through
cryptography, mandatory for all accesses, cannot be disabled, and
must be recorded in immutable logs. Likewise, authorization must
be
applied
after
authenticating,
ensuring
that
each
user,
system,
or platform only accesses the services and data that correspond to
them (Christian Chukwuemeka Ike
et al
., 2021; Jangam
et al
., 2022;
Lafarga Poyo, 2025; TM Forum, 2017).
Data protection is a comprehensive concept and its application
must be ensured both in transit and at rest, as well as during pro-
cessing,
avoiding
insecure
channels
and
using
encryption
at
all
times. Similarly, it is recommended to segment services into multiple
defense layers to contain potential breaches, design platforms free
of single points of failure, and apply secure congurations by default
(Babu, 2025; Gambo & Almulhem, 2025; Horbenko, 2025; Micheal,
2025; Gambo & Almulhem, 2025).
In multi-user or multi-company environments, it is essential to
ensure isolation between tenants through physical, virtual, or logi-
cal mechanisms, so that a compromise does not aect others. The
design must also provide for maintainability, allowing updates and
coexistence of API versions without compromising security, in ad-
dition to guaranteeing the integrity and provenance of components
through protected inventories and cryptographic trust chains (TM
Forum, 2017).
Likewise, privacy protection, especially of personally identiable
information, must be integrated from the start in compliance with
regulations such as the General Data Protection Regulation (GDPR),
incorporating
data
minimization,
access
control,
consent
manage-
ment, and traceability practices (Sun
et al.
, 2022; TM Forum, 2017).
Regarding security policy management, each platform denes its
own domain and trust boundary, with the exposed APIs being the at-
tack surface to protect. This requires the implementation of federated
access control mechanisms, multi-factor authentication —at least two
factors for sensitive data—, assignment of policies to roles and users,
19
Threats and Vulnerabilities in TM Forum Open APIs
Clayret Echenique Quintana, Eng. and Jorge Manuel Sotolongo Piedra, Eng.
pp. 7 - 25
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
as well as the distribution and execution of said policies at decision
and enforcement points within the platform (Fernández-Martínez
et
al
., 2024; Lefebvre
et al
., 2021; TM Forum, 2017).
As a technological reference, the Software-Dened Perimeter (SDP)
model is proposed as an exemplary mechanism by allowing services
to
be
hidden,
establishing
end-to-end
encrypted
connections,
and
simplifying the management of authentication, authorization, and ac-
cess control. This model is based on three main components: the
SDP client, responsible for verifying identity and device; the SDP
controller, acting as a trusted intermediary configuring access in
real-time; and the SDP gateway, ensuring encrypted termination
close to the protected services (Fernández-Martínez
et al
., 2024;
Lefebvre
et al
., 2021; TM Forum, 2017).
In this way, Open APIs are not only protected against common at-
tacks such as DDoS, Man-in-the-Middle, OWASP Top 10, or advanced
persistent threats, but also align with a systematic security framework
that includes the denition of trust boundaries, threat identication,
assessment and quantication of residual risks, and establishment of
access policies adapted to each domain (Christian Chukwuemeka Ike
et al
., 2021; Min
et al
., 2022; Sun
et al
., 2022; TM Forum, 2017).
Taxonomy of Threats and Vulnerabilities in TM Forum Open
APIs
Based on the document analysis described in the PRISMA meth
-
odology, a gap was identied in the specialized literature: the ab
-
sence of a correlation model that integrates the threat categories of
the STRIDE+P model, the vulnerabilities of the OWASP API Security
Top 10, and the specic components of the ODA architecture. To ll
this gap, a proprietary taxonomy of threats and vulnerabilities was
designed through a manual cross-correlation process.
The construction of the taxonomy followed four methodological
steps:
Disaggregation of sources. The 7 categories of the STRIDE+P mod
-
el were extracted from IG1187 ODA Enterprise Risk Assessment
20
Threats and Vulnerabilities in TM Forum Open APIs
Clayret Echenique Quintana, Eng. and Jorge Manuel Sotolongo Piedra, Eng.
pp. 7 - 25
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
v2.0.0 (Spoong, Tampering, Repudiation, Information Disclo
-
sure, Denial of Service, Elevation of Privilege, Privacy Risks) and
the 10 vulnerabilities of the OWASP API Security Top 10 2023.
Logical
correlation.
Links
were
established
between
each
STRIDE+P category and the OWASP vulnerabilities suscepti
-
ble to materializing that threat in a RESTful API context. Only
correlations with explicit technical foundation in the analyzed
documentation were recorded.
Mapping to ODA components. Each validated correlation was
assigned to the functional component of the ODA architecture
where the vulnerability would have the greatest impact.
Severity ranking. Own evaluation criteria were applied: impact
on telecom service continuity, exposure of personal or nancial
data, detection complexity, and alignment with regulatory re-
quirements. Severity was classied as Critical, High, Medium,
and Low.
The resulting taxonomy, presented in Table 2, identies 17 signif
-
icant correlations between the 7 STRIDE+P categories and 9 of the
10 OWASP 2023 vulnerabilities. The vulnerability identiers corre
-
spond to the numerical value assigned in the vulnerabilities section
of this paper.
Table 2.
Taxonomy of Threats and Vulnerabilities of
TM Forum Open APIs
21
Threats and Vulnerabilities in TM Forum Open APIs
Clayret Echenique Quintana, Eng. and Jorge Manuel Sotolongo Piedra, Eng.
pp. 7 - 25
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
The analysis reveals that 47% of the correlations present Critical
severity, concentrated in three axes: information disclosure, elevation
of privilege, and denial of service. The taxonomy allows identifying
the components with the highest number of Critical or High severity
correlations. In this case, the API Gateway emerges as the most criti-
cal component. This nding justies TM Forum's recommendation to
implement SDP and Zero Trust mechanisms at the access perimeter.
Unlike the original STRIDE model, the STRIDE+P extension explic
-
itly incorporates privacy risks. The taxonomy demonstrates that the
Privacy category does not operate in isolation, but rather manifests
itself mainly through the API3 vulnerability in the Customer Prole
and Consent Management components. This suggests that the pro-
tection of personal data in TM Forum Open APIs cannot be addressed
solely with access controls, but requires eld-level data schema vali
-
dation and data minimization mechanisms from its design.
Two
methodological
limitations
are
recognized:
the
correla-
tion is based on document analysis, without empirical validation
through penetration testing in real implementations of TM Forum
Open APIs; and the assigned severity is relative to the telecommu-
nications context and may vary in specific implementations. These
limitations define the future work proposed in the conclusions.
Conclusions
The study of the security of TM Forum Open APIs evidences the
growing need to address the vulnerabilities inherent to this type of
22
Threats and Vulnerabilities in TM Forum Open APIs
Clayret Echenique Quintana, Eng. and Jorge Manuel Sotolongo Piedra, Eng.
pp. 7 - 25
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
architecture. The study revealed the existence of signicant threats
that expose these programming interfaces. Particularly, the vulnera-
bility analysis highlighted the criticality of the risks associated with
these interfaces. The open nature of these APIs, designed to foster
interoperability and innovation in the telecommunications sector, si-
multaneously introduces exposure points that can be exploited by
malicious agents.
That is why, within TM Forum's security recommendations and
also those from OWASP, they mainly indicate that every API must un-
dergo a formal threat modeling and risk assessment process, which
allows identifying the attack surface and dening appropriate mit
-
igation measures. The method proposed for threat modeling in se-
curity frameworks is STRIDE+P according to IG1186, IG1187, and
IG1195, and the systematic adoption of the best practices proposed
by OWASP for Open APIs.
Part
of
these
good
practices
are
taken
into
account
in
projects
and regulations such as the OWASP API Security Project, the OWASP
Application Security Verication Standard (ASVS), and the NIST SP
800-228, 800-63, and 800-53 Rev 5 series. These resources provide a
comprehensive framework for designing and implementing security
controls that address the most common and critical vulnerabilities in
environments such as those where TM Forum Open APIs converge.
Therefore, they must be taken into account when selecting security
controls for this type of API.
This taxonomy constitutes an empirical foundation for the develop-
ment of future specic security frameworks for TM Forum Open APIs.
This correlation model allows locating specic architectural threats,
prioritizing controls by component, and sizing the regulatory impact
based on the type of exposed data.
23
Threats and Vulnerabilities in TM Forum Open APIs
Clayret Echenique Quintana, Eng. and Jorge Manuel Sotolongo Piedra, Eng.
pp. 7 - 25
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
Bibliographic References
Akintoye, A. (2025).
API Development with Laravel: A Quick Start Guide
. Apress.
https://doi.org/10.1007/979-8-8688-1576-8
Ariami, D., Windarta, S., Priambodo, D. F., & Amiruddin, A. (2024). Combining
STRIDE and Penetration Testing for Improved Web Application Security: A
Case Study on Stored XSS Vulnerabilities. 2024
Beyond Technology Summit
on Informatics International Conference
(BTS-I2C), 332-337. https://doi.
org/10.1109/BTS-I2C63534.2024.10942270
Babu, M. (2025).
Enhancing Cloud Security: Implementing and Evaluating the
Zero Trust Architecture with Firebase Services and Advanced Encryption
Algorithms
[Masters, Dublin, National College of Ireland]. https://norma.ncirl.
ie/7426/
Christian Chukwuemeka Ike, Adebimpe Bolatito Ige, Sunday Adeola Oladosu,
Peter Adeyemo Adepoju, Olukunle Oladipupo Amoo, & Adeoye Idowu Afolabi.
(2021). Redening zero trust architecture in cloud networks: A conceptual
shift towards granular, dynamic access control and policy enforcement.
Magna Scientia Advanced Research and Reviews
, 2(1), 074-086. https://doi.
org/10.30574/msarr.2021.2.1.0032
Csoma, M.-I., Koné, B., Botez, R., Ivanciu, I.-A., Kora, A., & Dobrota, V. (2020).
Management and Orchestration for Network Function Virtualization: An
Open Source MANO Approach
. 2020 19th RoEduNet Conference: Networking
in Education and Research (RoEduNet), 1-6. https://doi.org/10.1109/
RoEduNet51892.2020.9324847
Donegan, P. (2023).
Cybersecurity strategies: Risk management moves rmly into
the telco spotlight
. https://inform.tmforum.org/research-and-analysis/reports/
cybersecurity-strategies-risk-management-moves-rmly-into-the-telco-
spotlight
Fernández-Martínez, C., Bikos, A., Verikoukis, C., & Siddiqui, S. (2024).
Trusted
Access to 6G Testbeds Through a Security Intent-Driven Software-Dened
Perimeter Framework
. 2024 IEEE 29th International Workshop on Computer
Aided Modeling and Design of Communication Links and Networks (CAMAD),
1-6. https://doi.org/10.1109/CAMAD62243.2024.10942785
Gambo, M. L., & Almulhem, A. (2025). Zero Trust Architecture: A Systematic
Literature Review.
Journal of Network and Systems Management, 34
(1), 25.
https://doi.org/10.1007/s10922-025-09998-x
24
Threats and Vulnerabilities in TM Forum Open APIs
Clayret Echenique Quintana, Eng. and Jorge Manuel Sotolongo Piedra, Eng.
pp. 7 - 25
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
Garimilla, M. (2024). THE ART OF API DESIGN: BEST PRACTICES FOR
MODERN SOFTWARE DEVELOPMENT.
International Journal of Engineering
and Technology Research (IJETR), 9
(2), 229-239. https://doi.org/10.5281/
ZENODO.13772395
Horbenko, Y. (2025). Secure Front-End Automation Framework: A Novel
Approach to Client-Side Data Encryption and Zero Trust API Interaction.
Asian Journal of Research in Computer Science, 18
(6), 177-193. https://doi.
org/10.9734/ajrcos/2025/v18i6690
Hou, X., Zhao, Y., & Wang, H. (2024).
Voices from the Frontier: A Comprehensive
Analysis of the OpenAI Developer Forum
. arXiv. https://doi.org/10.48550/
arXiv.2408.01687
Jaiswal, I. A. (2025).
THE EVOLUTION OF WEB SERVICES AND APIS: FROM SOAP
TO RESTFUL DESIGN
. 14.
Jangam, S. K., Karri, N., & Muntala, P. S. R. P. (2022). Advanced API
Security Techniques and Service Management.
International Journal of
Emerging Research in Engineering and Technology, 3
(4), 63-74. https://doi.
org/10.63282/3050-922X.IJERET-V3I4P108
Lafarga Poyo, F. (2025).
Zero trust framework for microservices security: Analysis,
design, and implementation
. https://hdl.handle.net/20.500.14468/29428
Lefebvre, M., Nair, S., Engels, D. W., & Horne, D. (2021).
Building a Software
Dened Perimeter (SDP) for Network Introspection
. 2021 IEEE Conference on
Network Function Virtualization and Software Dened Networks (NFV-SDN),
91-95. https://doi.org/10.1109/NFV-SDN53031.2021.9665152
Mazzei, C., Firoamant, D., Quagliarini, A., Salatino, C., Reale, A., & Brunetti, F.
(2025).
The Open Chain Framework for the “Management by Projects” in Fiber-
only Network Wholesale Telcos
.
Micheal, D. (2025).
Digital Identity and Privacy in API-Driven Environments:
Combining Blockchain, Cryptography, and Forensic Techniques
.
Min, N. M., Visoottiviseth, V., Teerakanok, S., & Yamai, N. (2022). OWASP IoT
Top 10 based Attack Dataset for Machine Learning. 2022 24th
International
Conference on Advanced Communication Technology (ICACT), 317
-322.
https://doi.org/10.23919/ICACT53585.2022.9728969
Mochalov, V. P., Bratchenko, N. Yu., & Yakovlev, S. V. (2019). Process-Oriented
Management System for Infocommunication Networks and Services Based
on TM Forum Frameworx. 2019 International Russian Automation Conference
(RusAutoCon), 1-6. https://doi.org/10.1109/RUSAUTOCON.2019.8867619
25
Threats and Vulnerabilities in TM Forum Open APIs
Clayret Echenique Quintana, Eng. and Jorge Manuel Sotolongo Piedra, Eng.
pp. 7 - 25
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
Nikolov, L., & Aleksieva-Petrova, A. (2025).
Threat modeling based on STRIDE
framework for web application
. AIP Conference Proceedings, 3308(1), 030007.
https://doi.org/10.1063/5.0272341
Ohtani, M., Omata, S., & Kanishima, K. (2021). Development of Reference Model
for Enterprise Architecture Leveraging TM Forum Assets. 2021 22nd Asia-
Pacic Network Operations and Management Symposium (APNOMS)
, 210-213.
https://doi.org/10.23919/APNOMS52696.2021.9562626
OWASP. (2023).
OWASP API Security Project
| OWASP Foundation. https://owasp.
org/www-project-api-security/
Ranjan, P., Khunger, A., Veera, C., Satya, V., & Dahiya, S. (2022).
Threat Modeling
and Risk Assessment of APIs in Fintech Applications. 2,
44-61. https://doi.
org/10.56472/25832646/JETA-V2I2P108
Salt. (2025). Salt Security:
State of API Security Report.
https://content.salt.
security/Gartner-Voice-of-the-Customer.html
Sharma, A. (2025).
5G APIs security and privacy threat analysis within 5G
technology domain
. https://urn.kb.se/resolve?urn=urn:nbn:se:his:diva-25387
Sun, R., Wang, Q., & Guo, L. (2022).
Research Towards Key Issues of API Security
.
En W. Lu, Y. Zhang, W. Wen, H. Yan, & C. Li (Eds.), Cyber Security (pp. 179-192).
Springer Nature. https://doi.org/10.1007/978-981-16-9229-1_11
TM Forum. (2017).
Platform Security and Policy Management R17.0.1
(TR263D)
– TM Forum. https://www.tmforum.org/resources/technical-report/tr263d-
platform-security-and-policy-management-r17-0-1/
TM Forum. (2021a). IG1167 ODA Functional Architecture Exploratory Report
v5.1.0.
TM Forum
. https://www.tmforum.org/resources/exploratory-report/
ig1167-oda-functional-architecture-exploratory-report-v5-1-0/
TM Forum. (2021b). IG1187 ODA Enterprise Risk Assessment v2.0.0.
TM Forum
.
https://www.tmforum.org/resources/standard/ig1187-oda-enterprise-risk-
assessment-v2-0-0/
TM Forum. (2025a). About TM Forum |
TM Forum
. https://www.tmforum.org/
about/
TM Forum. (2025b).
OpenAPI Directory
. https://www.tmforum.org/oda/open-
apis/directory
26
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
1*
Engineer. Empresa de Telecomunicaciones de Cuba S.A (ETECSA).
Postal address: 11300. ernesto.carrazana@etecsa.cu
2
. Engineer. Empresa de Telecomunicaciones de Cuba S.A (ETECSA).
Postal address: 11300. irisleidis.casi@etecsa.cu
3
Engineer. Empresa de Telecomunicaciones de Cuba S.A (ETECSA).
Postal address: 11300. hector.jacas@etecsa.cu
Abstract
The guidelines for the design and implementation of data centers
are extensively documented, providing a high level of detail in every
aspect to consider for infrastructure deployment. However, this is not
the case regarding the design of redundancy for IT services. There-
fore, this article proposes an adaptation of the Uptime Institute's Tier
model for IT services, supported by the best design practices. As case
studies, ETECSA's Web Hosting platforms were employed as exam
-
ples of optimization, high availability, and security. In any IT service,
resource optimization and digital security represent two essential pil-
lars in the pursuit of achieving 100% availability. This article may be of
interest to those seeking guidance in the design of resilient and secure
IT services.
Keywords:
Threats in Open API, ODA, Open API, TM Forum Open
APIs, Open API Security
pp. 26 - 39
Received: 01/2026 | Accepted: 03/2026 | Published: 07/2026
From the Data Center to the Service:
Extending the Tier Model
Ernesto Carrazana Ruiz, Eng.
¹*
,
Irisleidis Lázara Casi Estevanell, Eng
²
,
Héctor Manuel Jacas Joa, Eng.
³
R
E
S
E
A
R
C
H
27
From the Data Center to the Service: Extending the Tier Model
Ernesto Carrazana Ruiz, Eng., Irisleidis Lázara Casi Estevanell, Eng., and Héctor Manuel Jacas Joa, Eng.
pp. 26 - 39
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
Introduction
Cuba
regulates
Information
and
Communication
Technologies
(ICTs) in Decree-Law No. 370/2017 (Gaceta Ocial No 45 Ordina
-
ria de 4 de julio de 2019 ), specically dening them in Article 3
of Chapter 1: “Information and Communication Technologies, herein
-
after ICTs, are dened as the set of resources, tools, equipment, com
-
puter programs and applications, networks, and media that allow the
compilation, processing, storage, and reception of information in any
format: voice, data, text, video, and images.” ICTs security is regulated
in Decree-Law No. 360/2019. (Gaceta Ocial No 45 Ordinaria de 4 de
julio de 2019). Both decrees outline in great detail the use and secu
-
rity of ICTs in Cuban society; however, they do not include any stan-
dard, requirement, or regulation for the design and implementation of
redundancy and the consequent level of availability of computer ser-
vices generated with ICTs.
Internationally, the Uptime Institute, creator and certier of the
Tier model, lists on its website the Tiers (levels) according to the scope
and characteristics of data centers, reected in the annual availability
level in percentage (Tier Certication, Uptime Institute, 2025). Each
tier reects a set of requirements associated with a specic maximum
allowable service disruption time. The following is a summary of some
of the main requirements of this model:
Tier I: the lowest level, it includes small backup systems for of-
ce work. It requires backup power, climate control, and a des
-
ignated location.
Tier II: it includes all the parameters of Tier I in addition to great-
er redundancy and electrical generation capacity.
Tier III: it includes all the parameters of Tier II in addition to high
tolerance to faults and interruptions.
Tier IV: it includes all the parameters of Tier III in addition to sev
-
eral independent systems, so that the eects are always partial.
ETECSA's Public Data Centers meet Tier III standards, meaning that
any Virtual Data Center client benets from high security and avail
-
ability by default. However, this does not guarantee that the services
¹ Ocial Gazette No. 45, Ordinary Edition, July 4, 2019
28
From the Data Center to the Service: Extending the Tier Model
Ernesto Carrazana Ruiz, Eng., Irisleidis Lázara Casi Estevanell, Eng., and Héctor Manuel Jacas Joa, Eng.
pp. 26 - 39
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
deployed on the infrastructure will have the same fault tolerance. This
article proposes an extension of the Tier model by extrapolating con-
cepts from the physical environment to the realm of IT services, aim-
ing to provide a classication for redundancy and availability levels,
as well as establish how to improve these parameters.
Materials and Methods
The extension of the Uptime Institute Tier model which is being
proposed in this article takes into account, among other aspects, en-
ergy backup and climate control, as these fall under a lower level of
responsibility. Therefore, the Tier model can be extended as follows:
Tier I: Low-resource IT services intended for redundancy and
backup. The servers are neither specialized nor segmented. In-
denite outages and permanent data loss are possible due to
system corruption or failure.
Tier II: Medium-resource IT services designed for redundancy
and backup. Multi-node designs with specialized, segmented,
and redundant servers. Deployed operating systems and ap-
plications must be maintained and updated. Indenite outages
and permanent data loss are possible in the event of destruc-
tion or corruption of the physical systems.
Tier III: It includes all the parameters of Tier II in addition to the
performance of geographically cross-referenced protection op-
erations (backups), so that in the event of physical destruction
of the data center or corruption of the systems, information is
not lost and a total restoration is possible, although in this sce-
nario there will be a prolonged service interruption.
Tier IV: Increases the replication capacity and high geographic
availability (or geo-redundancy) of Tier III, creating a multi-
site service where each site is a complete service operating in
active-active
or
active-passive
congurations.
This
requires
a high consumption of redundancy resources. Implementing
this scheme results in a low probability of data loss and service
interruptions.
29
From the Data Center to the Service: Extending the Tier Model
Ernesto Carrazana Ruiz, Eng., Irisleidis Lázara Casi Estevanell, Eng., and Héctor Manuel Jacas Joa, Eng.
pp. 26 - 39
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
Overview
Just as designing a data center requires analyzing the character
-
istics of the intended space and the types of servers to be acquired,
a similar analysis is equally useful for deploying an IT service. It is
essential to understand the types of CPUs, storage, the presence or
absence of GPUs, and the technology that orchestrates virtualiza-
tion, if it is a virtualized infrastructure. The presence of GPUs is a
prime example that inuences decision-making in today's world,
given their signicant impact on articial intelligence systems; in
their absence, it becomes crucial to analyze the feasibility of re-
placing them with CPUs.
Once the environment and type of service to be deployed are un-
derstood, the next step is to determine the desired level of redundan-
cy within the extended Tier model proposed in this article, based on
the system's criticality. The aspects to consider can be summarized as
follows:
CPU: CPU speed and allocation type. In virtualized environments,
this generally refers to virtualized CPUs, which do not necessar-
ily have to be a 1:1 representation of the physical CPU speed.
Storage: This refers to the type of physical hard drive (HDD, SSD,
or any other designation). This way, it is possible to make plans—
for example, to reserve SSD storage for applications with high
read and write demands, such as a database.
GPU: The presence of a GPU is fundamental when attempting to
deploy an articial intelligence system.
Technology
that
orchestrates
virtualization:
It
is
important
to
know the technology used to manage the environment (if it is
virtualized), as these technologies dier in their characteristics
despite
sharing
the
same
design
principles.
Examples:
Open
-
Stack, Proxmox, and VMware vCloud Director.
Redundancy: it is important to estimate the consumption of re
-
sources allocated to backups and the resources allocated to rep-
licating the dierent nodes of the system.
30
From the Data Center to the Service: Extending the Tier Model
Ernesto Carrazana Ruiz, Eng., Irisleidis Lázara Casi Estevanell, Eng., and Héctor Manuel Jacas Joa, Eng.
pp. 26 - 39
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
Network interfaces: it is necessary to know the bandwidth of
the network interfaces, as high network consumption can cause
bottlenecks.
Connectivity
A good network design and a robust rewall policy simplify ad
-
ministration and reduce the likelihood of errors. Even minor changes
to connectivity can lead to signicant service disruptions. Virtual
-
ization services provide rewall and router mechanisms, as well as a
virtualized networking system overall.
The three main measures in terms of connectivity are network seg-
mentation, the implementation of a standardized, easily understood
nomenclature in the management environment, and the restriction
of access to only those that are necessary.
Segmenting trac by network interfaces serves two purposes. The
rst, and most important, is security. Using dierent networks that
support dierent protocols makes it harder for a security breach to
occur and limits an attacker's ability to cause damage. The second is
the potential for bottlenecks if the network interfaces have low band-
width. To avoid them, trac types need to be isolated, allowing them
to run in parallel. Examples of network segmentation are presented
below:
Administration Network: This network is provided to each server
and it is intended to allow remote access by system administra-
tors. Accessing this network via a VPN is recommended. Under
normal circumstances, it has low bandwidth consumption.
Containment Network: In environments where a rewall or rout
-
er is required, service providers sometimes do not oer all the
required functionalities; this network layer is implemented to
isolate the Management Network, and can be orchestrated by
dierent applications, for example pfSense (pfSense, 2025).
Service Network: This layer is recommended for providing pub-
lic services, ensuring that only edge servers are directly exposed
to
the
internet.
Under
normal
circumstances,
it
has
moderate
bandwidth consumption.
31
From the Data Center to the Service: Extending the Tier Model
Ernesto Carrazana Ruiz, Eng., Irisleidis Lázara Casi Estevanell, Eng., and Héctor Manuel Jacas Joa, Eng.
pp. 26 - 39
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
Data
Network:
This
layer
handles
the
highest
trac
volume;
therefore,
isolation
from
external
access
is
recommended.
If
necessary, it could be segmented into specic networks, such as
the database network or storage network.
Public Network: Internet access network. With a single IP ad-
dress, it's possible to use NAT to segment and isolate published
services. For example, only allowing ports 80 and 443 for access
to a website.
Multi-Site Replication Network: If the goal is to achieve Extend
-
ed Tier IV and the infrastructure lacks a native replication meth
-
od, this network must be implemented at each site and linked
via a VPN for enhanced security. This ensures secure an ecient
data replication, as it avoids competing with other protocols for
bandwidth.
Redundancy and Availability
Achieving maximum availability requires high levels of redundan-
cy. A service with low redundancy is more susceptible to reduced up-
time due to minor issues. Therefore, the following best practices are
outlined for achieving high redundancy while optimizing resources:
Multiple servers: Deploying each application on at least two in-
dependent servers allows for hot deployment of changes and
provides fault tolerance.
Data applications: Some applications, such as storage or data-
base applications, require at least three servers to function cor-
rectly, as they must avoid split-brain mode. In this state, with an
even number of servers, the cluster is unable to determine the
correct data if 50% of the servers contain one piece of data and
the other 50% contain another. Therefore, it is recommended to
scale these types of services horizontally to ensure an odd num-
ber of servers.
Load balancing: Presenting multiple paths in the ow requires
implementing load balancers. When properly implemented and
optimized, they are a powerful tool, as they allow for trac mod
-
eration and the full utilization of the resources being balanced.
32
From the Data Center to the Service: Extending the Tier Model
Ernesto Carrazana Ruiz, Eng., Irisleidis Lázara Casi Estevanell, Eng., and Héctor Manuel Jacas Joa, Eng.
pp. 26 - 39
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
Multi-node system challenge: Implementing a multi-node sys-
tem with load balancing can cause undesirable behavior in some
applications, requiring an additional layer to address this issue.
For example, multiple PHP nodes can lead to session loss if a
caching system like Redis or Memcached is not in place.
Data replication: It can become complex and resource-inten-
sive. For example, if the static content of a website were stored
on ve web servers, with all nodes active, it would be neces
-
sary to store this static content ve times and, in addition, im
-
plement a multi-node replication system. The solution to this
problem is a centralized storage system, accessible via the net-
work, for example, using the NFS protocol.
Network replication: This process can become challenging if
the network parameters required by the replication application
are not available. Therefore, the system design must consider
the feasibility of synchronous replication (data must be correctly
replicated across all nodes before proceeding) or asynchronous
replication (data is replicated according to a planned schedule).
Infrastructure replication: replication can be guaranteed by the
infrastructure itself with native equipment replication systems.
Global load balancing: In an Extended Tier IV scenario, load bal
-
ancing between regions poses a challenge. Choosing a solution
that is appropriate to the environment in which the platform is
deployed is vital for the proper functioning of this complex de-
sign.
Backup system: both data and the servers themselves must be
protected. It is advisable to treat these two schemes dierent
-
ly, as it is not always appropriate to restore an entire server if
restoring the data can resolve the service disruption. Likewise,
it is advisable to plan dierent backup retention and execution
periods for dierent servers; for example, a database should be
protected more frequently than a web server.
Servers and Applications
Server specialization is desirable for many reasons, but the main
one is application isolation, which facilitates system maintenance
33
From the Data Center to the Service: Extending the Tier Model
Ernesto Carrazana Ruiz, Eng., Irisleidis Lázara Casi Estevanell, Eng., and Héctor Manuel Jacas Joa, Eng.
pp. 26 - 39
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
and updates and adds an extra layer of security. The following sec-
tions will discuss factors that must be taken into account when de-
signing and deploying some of the most widely used systems and
applications:
Load
balancers:
Among
the
many
options,
NGINX,
Apache,
and HAProxy stand out. Their respective documentation can
be found in the references (nginx, 2025), (Apache HTTP Server
Project, 2025), and (HAProxy, 2025). HAProxy excels over the
competition
thanks
to
its
robustness,
speed,
versatility,
and
features. Generally speaking, HAProxy can be the solution for
any load balancing need.
Storage: The need for distributed storage increases in redundant
environments.
Solutions
like
GlusterFS
and
Ceph
(GlusterFS,
2025; Ceph, 2025) allow for storage in the form of NFS or anoth-
er protocol required by the applications being implemented. In
the examples presented, the choice between one over the other
depends on the size of the system. GlusterFS has a shorter learn-
ing curve but fewer features; conversely, Ceph oers a highly
complex and versatile implementation.
Web servers: NGINX and Apache are currently the most popular
options for this purpose. Both are similar in performance and
functionality; choosing one or the other will depend on small
details such as the existence of the ".htaccess" le in Apache,
which allows for hot deployment of changes.
Memory caching: Redis and Memcached (Redis The Real-time
Data Platform, 2025; Memcached—a distributed memory object
caching system, 2025) are among the most widely used solutions
today to enhance system performance. Both are easy to deploy,
but only Redis oers replication capabilities in high-availability
environments; however, these solutions consume signicant re
-
sources.
Firewall,
router,
VPN:
The
ideal
solution
is
pfSense
(pfSense,
2025) when all these functionalities are needed. It is a compre-
hensive tool, easy to deploy, with the possibility of being imple-
mented in a high availability environment, even with facilities
for multi-site environments.
34
From the Data Center to the Service: Extending the Tier Model
Ernesto Carrazana Ruiz, Eng., Irisleidis Lázara Casi Estevanell, Eng., and Héctor Manuel Jacas Joa, Eng.
pp. 26 - 39
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
Databases such as MariaDB (MariaDB Foundation - MariaDB.org,
2025),
PostgreSQL
(PostgreSQL:
The
World's
Most
Advanced
Open Source Relational Database, 2025), and many others are
feasible options for deployment in the virtual realm; however,
the determining factor is performance when it comes to forming
a cluster, since the diculty in deployment and network char
-
acteristics can cause a considerable deterioration in response
time.
Security mechanisms: Operating systems like Windows and Li-
nux
have
built-in
security
mechanisms,
such
as
rewalls
and
security policies. In the case of Linux, proper conguration of
SELinux is crucial. This native security policy mechanism, if not
congured correctly, can lead to undesirable situations in ad
-
ministration and service delivery. Additionally, if you intend to
oer internet-facing services, it is advisable to implement a spe
-
cialized web application security application, such as ModSecu-
rity (ModSecurity Project, 2025).
Server protection: Server protection should be automated, ide-
ally using the tools provided by the infrastructure hosting the
platform. If this isn't possible, at a minimum, virtual machines
should be periodically downloaded and stored in a dierent lo
-
cation.
Data protection: Data can be replicated using tools such as Rsync
(rsync(1) - Linux man page, 2025) or Lsync (lsyncd, 2025), which
allow data to be sent remotely to secure environments. For data-
bases, periodical dumps can be run.
Identity and access service: applications such as FreeIPA (Free
-
IPA - Identity, Policy, Audit - FreeIPA Documentation, 2025) or
OpenLdap (OpenLdap, Main Page, 2025) are essential in environ
-
ments with multiple administrators and/or users, as they enable
centralized control of users and their roles across all systems.
Results and Discussion
Following the methodology outlined in this article, a design for a
shared hosting platform will be presented below. This platform would
be implemented using ETECSA's Virtual Data Center service.
35
From the Data Center to the Service: Extending the Tier Model
Ernesto Carrazana Ruiz, Eng., Irisleidis Lázara Casi Estevanell, Eng., and Héctor Manuel Jacas Joa, Eng.
pp. 26 - 39
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
The platform's overall vision is to oer a web hosting service to
multiple clients, so that all websites share the same resources but in
an isolated manner. The design was intended to place it at the Ex
-
tended Tier III level, with technological decisions made with the goal
of subsequently upgrading the platform to Extended Tier IV.
Five dierent networks are used in this design:
Management network via VPN
Public Network
Service Network
Data Network
 Authentication
Network
to
isolate
traffic
from
the
identity
service
The platform distributes its functionalities across the servers:
1.
Firewall: I tis a service provided by the infrastructure. It con-
stitutes the platform's rst rewall, where IP and port control, as
well as routing, are performed.
2.
Load balancers: These constitute the platform's entry point
and are implemented in active-passive mode. Their main func-
tion is carried out using the HAProxy service, which distrib-
utes traffic according to the type of connection established
by clients (FTP, HTTP, HTTPS) and balances the load between
servers that operate in active-active mode, such as balancing
HTTP and HTTPS requests between the two web servers. Ad-
ditionally, they provide a second layer of security due to the
use of the Fail2Ban tool, designed to mitigate spam and DDoS
attacks.
3.
WAF (Web Access Firewall): As a third line of defense, the ro
-
bust synergy between the NGINX service and the ModSecurity
module is leveraged to process and detect malicious content in
URLs that could lead to SQL injections or brute-force attacks. It
also detects sensitive content and a number of minor vulnerabil-
ities, providing the platform with high security and reliability.
4.
Web servers: These are the platform's main servers, where the
web page services run, using the Apache service in conjunction
with multiple versions of PHP. Their design and implementation
36
From the Data Center to the Service: Extending the Tier Model
Ernesto Carrazana Ruiz, Eng., Irisleidis Lázara Casi Estevanell, Eng., and Héctor Manuel Jacas Joa, Eng.
pp. 26 - 39
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
allow the two servers dedicated to this function to work togeth-
er to process all requests.
5.
Maxscale: They take their name from the service they imple-
ment, a MariaDB-specic load balancing solution. They oper
-
ate in active-passive mode and incorporate a caching service for
database queries, which reduces response time and the load on
the database cluster.
6.
Database: These servers run MariaDB in a master-slave cong
-
uration for writes and an active-active conguration for reads.
This
dual
standard
reduces
the
possibility
of
data
corruption
and increases query speed.
7.
FTP: FTP service implemented with vsftp, which can be used
by the clients to manage the content of their sites.
8.
IDM (Identity Manager): It is the platform's authentication ser
-
vice, which collects customer data and uses it on the web servers
to restrict customers to their own directories, thereby prevent-
ing them from accessing other customers' content.
9.
Centralized NFS service: It is provided by the Data Center,
crucial to reducing the platform's disk space consumption, as
it reduces the need to redundancy static site content and also
handles generating backups.
Figure
1
shows
a
deployment
diagram
that
brings
together
the
servers, their components, and the interaction between them:
Figure 1.
Deployment Diagram
37
From the Data Center to the Service: Extending the Tier Model
Ernesto Carrazana Ruiz, Eng., Irisleidis Lázara Casi Estevanell, Eng., and Héctor Manuel Jacas Joa, Eng.
pp. 26 - 39
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
After
analyzing
the
graph
in
Figure
2,
"Availability
of
ETECSA's
Web Hosting Platforms in 2025 (%)," it is possible to demonstrates the
eectiveness of the design and implementation of ETECSA's four web
hosting platforms: Business Web Hosting (serving state clients), Indi
-
vidual Web Hosting (serving individuals and SMEs), GOB.CU (serving
national priority websites), and the Press Information Center (CIP,
designed to serve national digital newspapers). Their design closely
resembles that described in this section. The availability times for
CIP and GOB.CU are excellent, noting that CIP, due to its characteris-
tics, belongs to the Extended Tier IV, while the other three platforms
belong to the Extended Tier III.
Figure 3.
ETECSA's web hosting platform cybersecurity incidents during 2025 (%)
The graph of the Figure 3, "Cybersecurity Incidents of ETECSA's
Web Hosting Platforms in 2025 (%)," demonstrates two facts: a secu
-
rity-focused design, when properly implemented, will provide sat-
isfactory results over time. Only two cybersecurity incidents were
recorded across the four platforms hosting more than 500 websites
in 2025. However, even the most secure systems are not immune to
vulnerabilities, as both incidents were caused by malicious agents
obtaining administrator passwords.
Figura 3.
Incidentes de ciberseguridad de las plataforma de
hospedaje web de ETECSA en 2025 (%)
38
From the Data Center to the Service: Extending the Tier Model
Ernesto Carrazana Ruiz, Eng., Irisleidis Lázara Casi Estevanell, Eng., and Héctor Manuel Jacas Joa, Eng.
pp. 26 - 39
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
Conclusions
The Extended Tier Model version presented in this article:
It oers a clear and simple guide on the guidelines to follow in
the design of redundancy for computer services.
It facilitates the setup of an IT service and the identication of
areas for improvement in optimization and availability.
It provides good practices for redundancy of computer services.
It is not a straitjacket, but rather another tool to support design
and decision-making.
Bibliographic References
Apache HTTP
Server Project
. (October 5, 2025). Obtenido de Apache: https://
httpd.apache.org
ceph. (October 5, 2025). Obtenido de ceph: https://www.ceph.io
FreeIPA - Identity, Policy, Audit - FreeIPA Documentation. (October 5, 2025).
Obtenido de FreeIPA: https://www.freeipa.org
Gaceta Ocial No 45 Ordinaria de 4 de julio de 2019. (October 5, 2025).
Obtenido de Gaceta Ocial de La República de Cuba: https://www.
gacetaocial.gob.cu/sites/default/les/goc-2019-o45.pdf
GlusterFS. (October 5, 2025). Obtenido de Gluster: https://www.gluster.org
Haproxy The Reliable, High Performance TCP/HTTP Load Balancer. (October 5,
2025). Obtenido de Haproxy: https://www.haproxy.org
lsyncd. (October 5, 2025). Obtenido de github: https://github.com/lsyncd/
lsyncd
MariaDB Foundation - MariaDB.org. (October 5, 2025). Obtenido de MariaDB:
https://mariadb.org
memcached - a distributed memory object caching system. (October 5, 2025).
Obtenido de memcached: https://memcached.org
Modsecurity Project. (October 5, 2025). Obtenido de Modsecurity: https://
modsecurity.org
nginx. (October 5, 2025). Obtenido de nginx: https://www.nginx.org
OpenLdap, Main Page. (October 5, 2025). Obtenido de OpenLdap: https://www.
openldap.org
39
From the Data Center to the Service: Extending the Tier Model
Ernesto Carrazana Ruiz, Eng., Irisleidis Lázara Casi Estevanell, Eng., and Héctor Manuel Jacas Joa, Eng.
pp. 26 - 39
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
pfsense. (October 5, 2025). Obtenido de pfsense: https://www.pfsense.org
PostgreSQL: The World
´
s Most Advanced Open-Source Relational Database.
(October 5, 2025). Obtenido de PostgreSQL: https://postgresql.org
Redis The Real-time Data Plarform. (October 5, 2025). Obtenido de Redis:
https://redis.io
rsync(1) - Linux man page. (October 5, 2025). Obtenido de linux.die.net: https://
linux.die.net/man/1/rsync
Tier Certication, Uptime Institute. (October 5, 2025). Obtenido de Uptime
Institute: https://www.uptimeinstitute.com/Tier Certication
40
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
1*
“José Antonio Echeverría” Technological University of Havana (CUJAE, for
its acronym in Spanish). Calle 9naB /282 y 284, Santa Fe, Playa, La Habana.
lazarosantana9627@gmail.com
2
“José Antonio Echeverría” Technological University of Havana (CUJAE, for
its acronym in Spanish). Calle 9naB /282 y 284, Santa Fe, Playa, La Habana.
maikolmirabal@nauta.cu. Aliación institucional completa. Postal address.
maikolmirabal@nauta.cu
3
“José Antonio Echeverría” Technological University of Havana (CUJAE, for
its acronym in Spanish). Calle 9naB /282 y 284, Santa Fe, Playa, La Habana.
raydel.gm@cime.cujae.edu.cu
pp. 43 - 60
Received: 01/2026 | Accepted: 03/2026 | Published: 07/2026
Technological Sunower
Lázaro Santana Linares, Eng
¹*
,
Maikol Ismael Mirabal Hidalgo, Eng
²
,
Raydel García Mesa, M. Sc.
³
R
E
S
E
A
R
C
H
Abstract
Currently, the rational use of energy is a fundamental aspect for
humanity. To achieve the optimization of the solar energy obtained
by a photovoltaic installation, there are two methodologies: the rst
consists of improving the internal components of a photovoltaic pan-
el so that its performance increases, and the second consists of in-
creasing the amount of solar radiation received by the panel. This
article focuses on the second methodology. To this end, the goal is to
keep the photovoltaic panel's surface area perpendicular to the light
radiation from the light source. With this objective in mind, this pa-
per presents the development and implementation of a dual-axis so-
lar tracker prototype, to be applied to various photovoltaic and solar
collection systems. This application allows the photovoltaic system
to increase its production from 20 to 40 %. A low-cost device was de
-
signed and built, with simple construction, with a exible structure
41
Technological Sunower
Lázaro Santana Linares, Eng., Maikol Ismael Mirabal Hidalgo, Eng., and Raydel García Mesa, M. Sc.
pp. 40 - 55
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
and adaptable to other solar modules, with automatic and continu-
ous operation, low electrical current consumption, and which can be
used in other applications that require an activity of solar tracking.
An Arduino Nano board, stepper motors with their controller, LDR
(Light Dependent Resistor) sensors, i.e., photoresist; and a Bluetooth
module were used for wireless communication with Android devices.
Additionally, an application was developed to facilitate its use by the
user, along with a battery and an electronic board for connecting all
components.
Keywords:
Threats in Open API, ODA, Open API, TM Forum Open
APIs, Open API Security
Introduction
The demands of modern life are causing humanity to become more
dependent on energy resources used for lighting, cooling, heating,
and transportation. This has led to high consumption of fossil fuels,
causing their depletion, an acceleration of global warming, and a rise
in ocean levels (Anusha, 2017). Pollution problems, risk, and envi
-
ronmental degradation are the reasons why it is important to seek
alternative energy sources to nuclear power and fossil fuels.
Addressing energy needs in a sustainable manner will greatly con-
tribute to solving early-century challenges such as poverty, climate
change, food security, among others (Casimiro
et al
., 2018). The cur
-
rent convergence of various crises (economic, along with continued
oil and food price volatility) creates a suitable scenario for proposing
a new formulation of policies, as well as for directing greater invest-
ments toward a safer and more sustainable development process.
The amount of solar energy annually received by the Earth is 1,5x18
KWh, which represents 10 000 times the energy consumption in that
same period. In other words, the Sun is the main actor in biological
processes on Earth and can be considered an inexhaustible source of
energy that can be harnessed through an appropriate collection and
conversion system to electrical and/or thermal energy, to mention just
a few (Echenique et al., 2018). Solar energy systems harness the solar
radiation incident on Earth to generate electricity or heating. The use
42
Technological Sunower
Lázaro Santana Linares, Eng., Maikol Ismael Mirabal Hidalgo, Eng., and Raydel García Mesa, M. Sc.
pp. 40 - 55
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
of solar energy presents certain diculties that are currently being
researched in order to achieve its proper utilization (Anusha, 2017).
In the case of Cuba, the Sun daily provides the national territory
with the energy equivalent to 0,5 liters of oil per square meter of the
Island. If we calculate this amount for the 110 000 km2 that Cuba has,
we arrive at the surprising conclusion that the country daily receives, in
solar energy, the equivalent of 55 million of tons of oil (Ecured, 2020).
However, of all this amount of energy, only a modest percentage is uti-
lized compared to other fuels, due to several factors, among which the
high costs of solar energy collection technologies and the utilization of
these systems stand out.
Among the various types of solar collection systems, photovolta-
ics stands out, which converts radiation from the Sun into electrical
energy. There are two ways to achieve better utilization of the so-
lar energy obtained: (a) improving the internal components of pho
-
tovoltaic cells (manufacturing materials and methods) so that their
performance increases (
El Porvenir
, 2020), and (b) increasing the
amount of solar radiation received, by keeping the panel's surface
area in a perpendicular position to the solar radiation (Onudi, 2009).
With the use of photovoltaic installations, electricity can be ob-
tained and used in homes or for industrial purposes. The electricity
obtained can be directly used or stored in accumulators for later use
at night or on days without sunlight. In recent years, the use of this
energy source has expanded from common uses, such as street light-
ing; powering trac lights, calculators and other electronic devices;
to surprising applications in air, maritime, and land transportation.
In
solar
energy
utilization
systems,
it
is
of
great
importance
to
have the ability to perform adequate solar tracking, in order to cap-
ture the maximum amount of radiation at all times of the day [Panati
(2015); Plesz,
et al
., (2009)]. For this purpose, so-called solar trackers
are used, which are electromechanical devices that orient the col-
lecting surface during the apparent path of the Sun. The objective of
this project is to present the development and implementation of a
prototype that enables solar trajectory tracking, thereby increasing
43
Technological Sunower
Lázaro Santana Linares, Eng., Maikol Ismael Mirabal Hidalgo, Eng., and Raydel García Mesa, M. Sc.
pp. 40 - 55
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
the radiation captured by the solar module through the continuous
movement of the panel, to improve the performance of a photovolta-
ic installation, with low-cost construction.
Materials and Methods
In this research, the following materials and methods were used:
observation of works related to the subject matter, use of the Inter-
net, work with available online articles on the topic, interviews with
specialists in solar panels, study of Arduino servomotors, and bib-
liographic consultations in libraries.
Solar Tracker
A solar tracker is a device composed of a xed part and a movable
one, whose purpose is to increase the capture of solar radiation. To
this end, it has a collecting surface that must remain perpendicular
to the Sun's rays throughout the day and within its range of motion.
These are used in all solar tracking technologies: conventional pho-
tovoltaic solar energy, concentrated photovoltaic solar energy and,
and concentrated solar thermal energy (Echenique
et al
., 2018).
A solar tracking system maximizes the electricity production of its
solar system by moving its panels to follow the Sun throughout the
day, optimizing the angle at which the panels receive solar radiation.
Solar trackers are generally used for ground-mounted solar panels
and large standalone solar installations such as solar trees.
When solar panels are exposed to sunlight, the angle at which the
sun's rays meet the surface of the solar panel (known as the angle of
incidence) determines how well the panel can convert incoming light
into electricity. The narrower the angle of incidence, the more energy
a photovoltaic panel can produce. Solar trackers help minimize this
angle by working to orient the panels so that light strikes them per-
pendicular to their surface (Plesz, et al., 2009).
Solar trackers can be classied according to the type of movement
they perform and the tracking algorithm.
Solar tracker by type of movement
Single-axis tracker
Rotation of the collecting surface occurs on a single axis, which
can be horizontal, vertical, or oblique. This type of tracking represents
44
Technological Sunower
Lázaro Santana Linares, Eng., Maikol Ismael Mirabal Hidalgo, Eng., and Raydel García Mesa, M. Sc.
pp. 40 - 55
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
a minimum degree of complexity and its cost is lower compared to
other types of trackers. The limitation of this type of tracker is that
it cannot perform complete solar tracking, as it can follow either the
azimuth or the solar inclination, but not both (Plesz,
et al
., 2009).
Dual-axis tracker
This type of tracker has two degrees of freedom and is capable of
performing full solar tracking, both in inclination and azimuth. Al-
though the installation performance may be higher compared to sin-
gle-axis trackers, it is important to mention that the dual-axis tracker
is more costly (Plesz,
et al
., 2009). Figure 1 illustrates the solar track
-
ers according to their type of movement.
Figure 1.
Solar tracking scheme
Solar tracker by tracking algorithm type
Solar clock tracking
This type is subject to the a 24 hour-clock and varies its position with
respect to the cycle of this clock, with eective tracking of 12 hours. It
moves at an angle of 120º. To achieve this, a Real-Time Clock (RTC) is in
-
corporated into the device / the device is tted with a Real-Time Clock
(RTC), which consists of a microcontroller that accurately counts time and
also incorporates / is equipped with a sensor to compensate for tempera-
ture changes that alter the electrons of the silicon crystal (Lakeou
et al
.,
2006).
Luminosity-based tracking
The algorithm for this type of tracker is based on the signal provided
by one or more sensors. Depending on this signal, a control command is
sent to one or more motors to position them at the most suitable luminos-
ity point. This type of tracking is easy to implement (Plesz,
et al
., 2009).
45
Technological Sunower
Lázaro Santana Linares, Eng., Maikol Ismael Mirabal Hidalgo, Eng., and Raydel García Mesa, M. Sc.
pp. 40 - 55
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
Astronomical programming tracking
This type of tracker is completely independent of weather con-
ditions, since its algorithm does not require sensors to indicate the
brightest point. Tracking in this case depends on a series of equa-
tions that predict the Sun's position at any given time. Although this
model is highly accurate, it should be noted that implementing the
algorithm involves a high degree of complexity (Sierra
et al
., 2008)
For this project, a solar tracker prototype was chosen that moves
on two axes and uses a luminosity-based tracking algorithm. An eco-
nomical device, with low-cost and recycled components. For its con-
struction, an Arduino Nano board was selected because it oers great
compatibility with all modules available on the market focused on
Arduino is low-cost and has simple and exible programming. Once
congured, it can perform unattended and automatic solar tracking.
General design
The new solar tracker prototype now consists of three main stag-
es: electronic system, electromechanical system, and software. Before
manufacturing the device, a simulation was performed in Proteus (Pro
-
teus Design Suite), as shown in Figure 2. In this simulation, its correct
operation was veried.
Figure 2.
Prototype simulation in Proteus
46
Technological Sunower
Lázaro Santana Linares, Eng., Maikol Ismael Mirabal Hidalgo, Eng., and Raydel García Mesa, M. Sc.
pp. 40 - 55
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
Electronic system
Figure 3 illustrates the electronic schematic of the prototype.
Figure 3.
Electronic schematic of the prototype
Microcontroller
Arduino is an open-source electronic platform for creating micro-
controller-based prototypes and applications, where both software
and hardware are free, exible, and easy to use. It can capture infor
-
mation from its surroundings through its input pins, to which a wide
range of sensors and transducers can be connected. Similarly, it can
act upon its surroundings through its output pins or lines. With these
lines, it is possible to control lights, motors, relays, speakers, and all
types of actuators (Sitiosolar, 2020).
The microcontroller on the Arduino board is programmed using
the Arduino programming language. It is a high-level language with
statements and syntax very similar to those of the C language. It also
has a development environment based on Processing, which allows
editing a program with the Arduino language, verifying it, compiling
it, and writing it to the controller (Sitiosolar, 2020).
The tracking system uses the Arduino board (Figure 4) as the main
controller. This board will be used to control the motors through four
digital outputs connected to two drivers, as well as to read informa-
tion from the four radiation sensors through four analog inputs. Table
1 shows the technical specications of the Arduino Nano board.
47
Technological Sunower
Lázaro Santana Linares, Eng., Maikol Ismael Mirabal Hidalgo, Eng., and Raydel García Mesa, M. Sc.
pp. 40 - 55
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
A4988 stepper motor control
The A4988 board, or A4988 driver “Pololu” (Figure 5), controls a
stepper motor of up to 2A. A. It has ve dierent resolutions: full step,
half step, quarter step, eighth step, and sixteenth step. Control is per-
formed so that each step input pulse corresponds to one micro-step
of the stepper motor in the direction selected by the DIR pin (Lakeou
et al
., 2006). Two drivers were used to control the two stepper motors
used, congured for full-step operation at 1A.
Figure 4.
Arduino Nano
Table 1.
Technical specifications of the Arduino Nano board
Figure 5.
A4988 Driver
48
Technological Sunower
Lázaro Santana Linares, Eng., Maikol Ismael Mirabal Hidalgo, Eng., and Raydel García Mesa, M. Sc.
pp. 40 - 55
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
Solar position sensors
For positioning, LDR sensors, or photoresistors, were used. These
are variable resistors depending on the light incident on their surface.
The greater the intensity of light incident on the LDR's surface, the
lower its resistance, and the less light incident, the greater its resis-
tance (Sitiosolar, 2020). For this project, four sensors were arranged,
one for each quadrant of the panel or solar module (top right and left,
bottom right and left), as shown in Figure 6.
Figure 6.
Distribution of the LDR
The system always drives the four sensors to have the same light
intensity, indicating that the panel is oriented toward the Sun. The
conditioned signals from each LDR are read on independent inputs
of
the
Arduino
Nano,
which
performs
calibration
and
calculation,
and executes the corresponding movements of the stepper motors. A
Light Emitting Diode (LED) was incorporated to display the calibra
-
tion time of the LDR.
Bluetooth module
The Bluetooth HC-05 Module (Figure 7) was incorporated into the
system. This connects Arduino with a device wirelessly (Bluetooth),
with the ease of operation of a serial port. All module parameters
can be congured using AT commands. Bluetooth communication
occurs between two types of devices: a master and a slave. Blue-
tooth is the name given to the communication protocol specially
designed for low-power devices requiring short-range transmission
and based on low-cost transceivers.
49
Technological Sunower
Lázaro Santana Linares, Eng., Maikol Ismael Mirabal Hidalgo, Eng., and Raydel García Mesa, M. Sc.
pp. 40 - 55
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
Battery
For
storing
the
electrical
charge
generated
by
the
photovoltaic
system, a battery was developed using 18650 lithium cells recycled
from laptops and electric vehicle batteries. This is also used as a pow-
er source for the electronic circuit and the devices used, enabling a
self-powered and continuously operating system.
A total of 12 cells were used, connected in three columns and four
rows. The result was a 12,6V y 10A lithium battery, similar to the one
shown in Figure 8.
Figure 7.
Bluetooth module
Figure 8.
Battery
Electronic board
A printed circuit board (PCB) was developed for connecting the
prototype's electronic devices: Arduino Nano board, A4988 drivers,
50
Technological Sunower
Lázaro Santana Linares, Eng., Maikol Ismael Mirabal Hidalgo, Eng., and Raydel García Mesa, M. Sc.
pp. 40 - 55
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
LDR sensors, and Bluetooth module. Additionally, a circuit was im
-
plemented for regulating the voltage delivered by the photovoltaic
system and for automatic battery disconnection, facilitating prop-
er battery charging. The following components were used: resistors
of 100Ω 3W, 100Ω, 255Ω, 1KΩ, 1,5KΩ, 2,4KΩ, 6,4KΩ, 10KΩ and a
potentiometer; electrolytic capacitors of 100uF 50V and 100uF 25V;
1N4007 diodes; 5mm 3,6V LEDs; a 2SC1162 transistor and a BD139,
a 12V relay, and a LM317T voltage regulator.
Electronic components for display, device protection, and supply
voltage regulation were added to this circuit. These components are:
7805 voltage regulator, 100uF 50V and 100uF 16V electrolytic ca
-
pacitors, 500Ω and 10KΩ resistors, and a 5mm 3,6V LED.
Figure 9 shows the two sides of the PCB developed in Proteus. Its
dimensions are: 97,3 mm wide and 121,5 mm long.
Figure 9.
Prototype PCB
Electromechanical system
Metal structure
To support the solar panel, a metal piece in the shape of a U will be
used, on which the photovoltaic module will rest. This piece will rest
on a cubic metal base. For this prototype, a recycled chassis from a
computer power supply was used. Inside this base, the printed circuit
board will be placed. Recycled gearboxes from disused printers were
also used to improve system mobility.
It is important to reiterate that the entire assembly described will
be very lightweight to avoid the use of large motors, which would in-
crease system cost and complexity.
51
Technological Sunower
Lázaro Santana Linares, Eng., Maikol Ismael Mirabal Hidalgo, Eng., and Raydel García Mesa, M. Sc.
pp. 40 - 55
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
Stepper motors
The stepper motor, also known as a step motor, is an electro-
mechanical device that converts a series of electrical pulses into
discrete angular displacements, meaning it is capable of rotating a
certain number of degrees depending on its control inputs (Lakeou
et al
., 2006). In this prototype, two EM-323 stepper motors recycled
from an EPSOM LX-300+ printer were used. These have a step angle
of 3,75º (96 steps per revolution). Table 2 shows the technical spec
-
ications of this motor.
Table 2.
Technical specifications of the EM-323 stepper motor
Software
Arduino IDE
Since Arduino is a board that executes a series of previously up-
loaded codes, a program called IDE (Integrated Development Envi
-
ronment) is needed to load those codes. This IDE, installed on a PC,
is a very simple environment to use, and the program to be executed
by Arduino is written in it. Once written, it is loaded via the USB port,
and Arduino will begin working autonomously (Sitiosolar, 2020). In
broad terms, the operation of the developed software can be appre-
ciated through the owchart in Figure 10.
Figure 10.
Basic flowchart
52
Technological Sunower
Lázaro Santana Linares, Eng., Maikol Ismael Mirabal Hidalgo, Eng., and Raydel García Mesa, M. Sc.
pp. 40 - 55
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
App inventor
App inventor is a software development environment created by
Google Labs for developing applications for the Android operating
system. The system is free and can be easily downloaded from the
web. A custom / customized application was developed on this plat-
form for this system, compatible with devices running the Android
operating system. This application has a pleasant, simple, and easy-
to-use visual interface. It allows for improved ease of control of the
solar panel by users, as well as displaying readings of the following
values: Solar Panel Voltage, Battery Voltage, and Battery Charge Per
-
centage. This is shown in Figure 11.
Figure 11.
Prototype application
The nal construction of the device is shown in Figure 12. This
prototype was developed to demonstrate the functionality of the pro-
posed solar tracking system. It serves as a basis for the development
of other tracking systems with the same features, but with character-
istics adapted to the photovoltaic module used.
Figure 12.
Solar tracker prototype
53
Technological Sunower
Lázaro Santana Linares, Eng., Maikol Ismael Mirabal Hidalgo, Eng., and Raydel García Mesa, M. Sc.
pp. 40 - 55
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
Results and discussion
Operation
The LDR (photoresistors) help determine where there is more
brightness
during
the
day.
These
were
placed
at
the
vertices
of
the
panel. To achieve greater accuracy in brightness measurement,
the photoresistors should be covered around them to avoid capturing
diuse
solar
radiation,
in
other
words,
the
propagation
of
light
(electromagnetic
waves)
that
is
scattered
and
reected
in
the
atmosphere.
The LDR readings are calibrated and compared by the Arduino,
which sends signals to the stepper motor drivers to execute the nec-
essary movements. For example, the groups of LDR called left and
right are compared, and if there is a dierence greater or less than the
determined sensitivity range, then a corresponding movement must
be executed. The same applies to the top and bottom sensor groups,
except that these determine the movement of the other axis. In this
way, sunlight strikes the panel surface perpendicularly.
The photovoltaic module transforms the captured solar energy
into electrical energy. This is regulated to charge the battery that
powers the entire system. A disconnection system was developed
for it when fully charged.
The Bluetooth module enables wireless communication between
the prototype and the device running the developed Android appli-
cation. It allows the user to control system movement and view the
following values: Solar Panel Voltage, Battery Voltage, and Battery
Charge Percentage. Figure 13 illustrates the operating schematic of
the developed prototype.
Figure 13.
Prototype operating schematic
54
Technological Sunower
Lázaro Santana Linares, Eng., Maikol Ismael Mirabal Hidalgo, Eng., and Raydel García Mesa, M. Sc.
pp. 40 - 55
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
Tests performed and results obtained
Tests to validate the operation of the solar tracker device and the
algorithm were carried out using a natural light source, on a scale
prototype of a photovoltaic installation. Using the prototype with-
out the tracker function initially and subsequently with the tracker
device activated, several values were recorded for dierent angular
positions.
When comparing the results (shown in Figure 14), the performance
increase of the installation with tracker compared to the static instal-
lation is 33,5 %.
Figure 14.
Comparison of voltage measured in a fixed panel with voltage in a panel using a
solar tracker
Panel Voltage
Moving Panel
Fixed Panel
Conclusions
The constructed prototype meets the required dual-axis tracking
characteristics, performing solar tracking. This increases the radia-
tion captured by the module by up to 33,5% and therefore improves
the performance of the photovoltaic installation. The results obtained
support that the developed dual-axis solar tracker achieves better
energy performance compared to a photovoltaic system with xed
panels. A low-cost device with low electrical current consumption
was achieved, with simple construction, a exible structure adapt
-
able to other solar modules, and automatic and continuous opera-
tion. The constructed prototype can be used in other applications
requiring solar tracking activity, such as solar collectors, solar fur-
naces, among others.
55
Technological Sunower
Lázaro Santana Linares, Eng., Maikol Ismael Mirabal Hidalgo, Eng., and Raydel García Mesa, M. Sc.
pp. 40 - 55
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
Bibliographic References
ANUSHA, K.; CHANDRA, S. (2017). Design and development of real time clock
based ecient solar tracking system.
International Journal of Engineering
Research and Applications
. Retrieved from www.ijera.com
CASIMIRO, R.; GEA, M.; HOYOS, D; PLACCO C. (2018, septiembre).
SEGUIDOR
SOLAR DE DOS EJES PARA HELIÓSTATO
. Instituto de Investigación en
Energías No Convencionales (INENCO).
ECHENIQUE, R.; PERINO, E.; ODICINO, L.; PARELLÓ, D.; MURDOCCA, R.
(2018, septiembre).
SISTEMA DE SEGUIMIENTO SOLAR PARA PANELES
FOTOVOLTAICOS
. Laboratorio de Electrónica, Investigación y Servicios
(L.E.I.S.) - Laboratorio de Energía Solar y Medio Ambiente - Facultad de
Ciencias Físico Matemáticas y Naturales -U.N.S.L.
EcuRed, R. (2020, mayo 10).
Energía Solar en Cuba
. Retrieved from http://www.
ecured.cu/ Energ%C3%Ada_solar_en_Cuba
ELPORVENIR. (2020, abril 16).
Seguidores Solares, una Optimización de la
Energía Solar
. Retrieved from http://www.elporvenir.com.mx/notas.asp?nota_
id=2 53973.
ONUDI, N. C. (2009, junio).
Hacia una Agenda Energética Integrada más allá de
2020
. Hourg, Viena, Austria: Conferencia Internacional de Energía.
PANAIT, M.A; TUDAROSHE, T. (2015).
A simple neural networks solar tracker
for optimizing conversion eciency in o-grind solar generators
. Santander:
ICREPQ.
PLESZ B.; SÁGI P.; TIMÁR-HORVATH, V. (2009).
Enhancement of solar panels
power generation by the usage of solar tracking
. 3, 1. Proceedings of ECOpole,.
S. LAKEOU; S., OSOSANYA; E. LATIGO, O. MAHAMOUD; W. KARANGA; G.
OSHUMARE; W. (2006).
Design of a low-cost digital controller for a solar
tracking photo-voltaic (PV) module and wind turbine combination system
.
Dresden, Germany: 21st European Photovoltaic Solar Energy Conference.
SIERRA, F.; CARO, E.; MEJÍA, F. (2008.).
Tecnologías para el aprovechamiento de
la energía solar
. Bogotá: Universidad Nacional de Colombia.
SITIOSOLAR. (2020, mayo 27).
Los Paneles Solares Fotovoltaicos
. Retrieved from
http://www.sitiosolar.com/paneles%20fotovoltaicas
56
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
1*
Empresa de Tecnología de la Información. Calle 18 #4310 e/ 43 y 47. Miramar,
Playa La Habana, Cuba.zuleykacalzado@gmail.com
2
Empresa de Tecnología de la Información. Calle 18 #4310 e/ 43 y 47. Miramar,
Playa La Habana, Cuba.gabriela@eti.biocubafarma.cu
Empresa de Tecnología de la Información. Calle 18 #4310 e/ 43 y 47. Miramar,
Playa La Habana, Cuba.damian@eti.biocubafarma.cu
Abstract
Inventory management ensures order within the warehouse and
streamlines operational workows. Through proper control of this
management model, companies can eciently satisfy customer de
-
mand. Biocubafarma is the holding company responsible for man-
ufacturing medicines, equipment, and high-tech services aimed at
improving
the
health
of
the
Cuban
population
and
geared
toward
generating exportable goods and services. Although a large portion of
its processes is computerized—thereby optimizing many of its opera-
tions—the development of technological solutions remains necessary
to drive the Company’s advancement toward digital transformation and
the evolution into Industry 4.0. This article addresses the outcomes of
a sectoral innovation project carried out at the Information Technolo-
gy Company (ETI, for its Spanish acronym). The project aimed to intro
-
duce smart tags into the supply inventory management system utilized
pp. 56 - 66
Received: 01/2026 | Accepted: 03/2026 | Published: 07/2026
Towards Inventory Management 4.0:
Integration of Digital Technologies in
Cuba's Biopharmaceutical Supply Chain
Zuleyka Calzado Mesa, M. Sc.
¹*
, Gabriela Ojeda de la Paz, Eng
²
,
Damián Aldait García Pérez, Eng.
³
R
E
S
E
A
R
C
H
57
Towards Inventory Management 4.0: Integration of
Digital Technologies in Cuba's Biopharmaceutical Supply Chain
Zuleyka Calzado Mesa, M. Sc., Gabriela Ojeda de la Paz, Eng., and Damián Aldait García Pérez, Eng.
pp. 56 - 67
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
by the Biocubafarma Holding Company; modify said system by incor-
porating batch and location levels; and develop an Android-based ap-
plication that enables operators to optimize warehouse operations and
communicate in real time with the inventory system. All of this results
in a 40% reduction in data capture times, the elimination of manual
logging errors, and the achievement of real-time operational synchro-
nization, ultimately maximizing supply chain eciency.
Keywords:
smart labels; inventory management; industry 4.0;
batch; digital transformation
Introduction
"Inventory represents a strategic reserve of materials, raw materi-
als, work-in-process, or nished goods that, although not used sys
-
tematically, guarantees the continuity of customer service" (Cespón
Castro, 2012). According to Schroeder (cited in Alemán Rodríguez,
2013), inventory is a stored quantity of materials intended to facil
-
itate production or satisfy consumer demand. The aforementioned
approaches highlight that inventory is composed of physical resourc-
es, whose rigorous control, is vital to avoid stockouts and ensure the
proper functioning of any company or business.
Inventory management, dened by Cespón Castro (2012) as "the
process that seeks to minimize the stored quantity without aecting
customer
service,"
has
become
an
essential
process
for
maximizing
business eciency and protability. Logistics, for its part, integrates
the planning and management of operations linked to the ow of raw
materials, semi-nished, and nished products from their origin to the
nal consumer.
With the advent of Industry 4.0 and digitalization, inventory man-
agement has undergone a profound transformation through automa-
tion and the use of smart technologies. The implementation of smart
labels, due to their ability to store data, enables wireless communica-
tion,
remote
identication,
traceability,
and
real-time
management,
improving accuracy and agility in the supply chain.
Biocubafarma, a leading biotechnology and pharmaceutical com-
pany, has strengthened its logistic process in accordance with strict
58
Towards Inventory Management 4.0: Integration of
Digital Technologies in Cuba's Biopharmaceutical Supply Chain
Zuleyka Calzado Mesa, M. Sc., Gabriela Ojeda de la Paz, Eng., and Damián Aldait García Pérez, Eng.
pp. 56 - 67
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
regulations
and
has
achieved
comprehensive
production
tracking
from the reception of raw materials to the delivery of nished prod
-
ucts to the Ministry of Public Health (MINSAP, for its Spanish acro
-
nym). However, challenges persist in controlling products within the
supplies area at the batch and location levels, as well as in tracking
expiration dates for food products, which hinders optimal manage-
ment.
Faced with this problem, ETI undertook the development of a sec
-
toral innovation project to modernize the «Insumo» (Supply) inventory
management system at the batch and location levels. Likewise, it de-
veloped an application that manages warehouse operations and com-
municates in real time with the inventory software. Additionally, for
the products, smart labels were incorporated. This novel project is a
clear example of how digitalization and Industry 4.0 can contribute to
optimizing traceability, eciency, and competitiveness in the Cuban
biotechnology and pharmaceutical industry.
Materials and methods
Among the materials and methods used in the development of this
project are:
Documentary Analysis
Concept:
Scientic
research
method
involving
the
selection,
consultation,
critical
review,
and
deconstruction
of
relevant
information sources to identify the state of the art of a study
object, evaluate its theoretical-methodological bases, and an-
alyze regulatory or normative frameworks.
Application in the project:
Study of the international, national,
and
sectoral
regulatory
framework
applicable
to
the
inventory
management system.
Observation
Concept:
Data
collection
method
consisting
of
the
direct,
sys-
tematic, and deliberate perception of phenomena in their natural
environment. In its non-participant modality, the researcher acts
as an external and neutral agent to record objective data and be-
haviors (including extra-verbal information) without intervening
in the dynamics.
59
Towards Inventory Management 4.0: Integration of
Digital Technologies in Cuba's Biopharmaceutical Supply Chain
Zuleyka Calzado Mesa, M. Sc., Gabriela Ojeda de la Paz, Eng., and Damián Aldait García Pérez, Eng.
pp. 56 - 67
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
Application in the project:
Diagnosis of current workows and
requirements gathering with the end-users of the organization.
Project Management Framework (Scrum)
Concept:
Agile and adaptive framework designed for the manage-
ment and development of complex projects. It is based on empir-
ical process control, iterative and incremental development, and
continuous feedback to maximize the timely delivery of value.
Application in the project:
Management of the software lifecycle
through the denition of sprints, ensuring information ow, risk
mitigation, and eective communication between the technical
team and stakeholders.
Computer Resources and Tools
Computer resources:
A set of technological assets, hardware com-
ponents, development environments, and software applications that
enable data processing, storage, automation, and management within
a project.
The technological ecosystem, standards, and tools applied in the
design, development, deployment, and quality assurance of the inven-
tory management system and the mobile application are broken down
below:
60
Towards Inventory Management 4.0: Integration of
Digital Technologies in Cuba's Biopharmaceutical Supply Chain
Zuleyka Calzado Mesa, M. Sc., Gabriela Ojeda de la Paz, Eng., and Damián Aldait García Pérez, Eng.
pp. 56 - 67
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
Discussion and outcomes
The
sectoral
innovation
project
developed
for
the
integration
of
digital technologies in Biocubafarma's inventory management showed
positive results that contributed to the modernization of the logistics
system in the Cuban biopharmaceutical supply chain.
The introduction of smart labels allowed for the automatic and re-
al-time identication of stored supplies, signicantly improving prod
-
uct traceability from reception to warehouse output. The capacity of
these labels to contain specic information on batch, location, and ex
-
piration dates facilitated rigorous control and the reduction of human
61
Towards Inventory Management 4.0: Integration of
Digital Technologies in Cuba's Biopharmaceutical Supply Chain
Zuleyka Calzado Mesa, M. Sc., Gabriela Ojeda de la Paz, Eng., and Damián Aldait García Pérez, Eng.
pp. 56 - 67
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
errors in inventory management. This project was framed within the
improvement of the "Insumos" (Supplies) inventory management pro
-
cess, through the introduction of innovative technologies and passive
optical networks with Gigabit Passive Optical Network (GPON) tech
-
nology, to contribute to the digital transformation of the Cuban bio-
technology and pharmaceutical industry. The execution of each of the
dened results is detailed below.
1-) Result 1:
"
Insumo
" inventory management system at the batch
level was modied.
The main result of this work was the reengineering of the inventory
management system (Mistral) to operate at the batch level, a funda
-
mental advancement for Biocubafarma where traceability and expiry
control are quality and safety imperatives.
Modied and Implemented Functionalities
Product entry and exit operations were modied to incorporate the
"batch" level. The aected operations include:
Entry:
receiving report and claim report.
Exit:
delivery note, request and return note, exit note for Work Or-
der (WO), other exits, exit transfers, and transfers between areas.
Additionally,
new
functionalities
were
developed
for
warehouse
management at this new level:
Batch Relocation:
allows moving specic batches between loca
-
tions, optimizing space and prioritizing products based on their
expiration date.
Label Printing:
the generation and printing of DataMatrix labels
for products and batches, as well as barcodes for location identi-
cation, was implemented. This constitutes the physical basis for
traceability.
2-) Result 2:
Develop an application for the Android system with
functionalities that intervene in the inventory management process,
linked to the "Insumos" inventory management system.
To provide operators with an agile, real-time tool, an Android ap-
plication
was
developed.
This
application
communicates
with
the
Mistral system and allows for the immediate capture of information
by reading DataMatrix labels and barcodes.
62
Towards Inventory Management 4.0: Integration of
Digital Technologies in Cuba's Biopharmaceutical Supply Chain
Zuleyka Calzado Mesa, M. Sc., Gabriela Ojeda de la Paz, Eng., and Damián Aldait García Pérez, Eng.
pp. 56 - 67
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
The application replicates and allows for the remote, guided execu-
tion of all warehouse operations modied in the central system, guar
-
anteeing data integrity from the point of operation. The functionalities
implemented in the app include: receiving report, delivery note, return
note, exit note to WO, other exits, transfers, transfers between areas,
batch relocation, and management of locations by product or by entry.
The set of results presented describes the digitalization of business
processes: logistics and inventory management. The introduction of
batch-level traceability and real-time data capture through mobile de-
vices not only optimizes space and prioritizes products but is also a
quality and safety imperative, particularly critical in a sector like phar-
maceuticals (BioCubafarma). The Android app acts as a crucial bridge
between the physical world (DataMatrix labels) and the central system
(Mistral), eliminating delays and reducing errors.
Similarly, it is important to highlight that these results are at the
forefront of technological and logistics management trends, aligning
with the principles of Industry 4.0. The solution is not mere digitaliza-
tion, but a deep integration that employs key contemporary technolo-
gies:
Real-time and batch-level traceability:
is the gold standard in
regulated industries like pharmaceuticals and food.
Integrated systems architecture (Mistral + Android App + Mule
ESB):
reects the paradigm of systems of systems, where dierent
software components seamlessly communicate to oer a unied
solution.
Use of mobile technologies (Android) and automatic identica
-
tion (DataMatrix):
accessible and high-impact technologies that
modernize human-system interaction on the warehouse oor.
Automation of logistics processes:
the reengineering of process-
es such as transfers and automated relocation places the organi-
zation at an advanced level of digital maturity.
Scope and characteristics of the contribution achieved
The sectoral innovation project developed for inventory management
63
Towards Inventory Management 4.0: Integration of
Digital Technologies in Cuba's Biopharmaceutical Supply Chain
Zuleyka Calzado Mesa, M. Sc., Gabriela Ojeda de la Paz, Eng., and Damián Aldait García Pérez, Eng.
pp. 56 - 67
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
in a supplies warehouse at BioCubaFarma represents a high-impact in-
tervention at the national level with a solid potential for international
repercussion in contexts of similar regulatory and logistical complexity.
1. Scope of the Contribution and Strategic Signicance
Technological
Sovereignty
and
National
Repercussion:
For
the
BioCubaFarma company, this development constitutes an own,
sovereign, and sustainable solution, eliminating dependence on
external applications.
Alignment with Industry 4.0: The solution achieves an advanced
level
of
digital
maturity
for
the
Business
Group
by
automating
operations in a supplies warehouse. It is not limited to record-
ing data, but profoundly transforms the operational ow through
process reengineering that places the company at the forefront of
contemporary management trends.
Critical Impact on Quality and Safety: By ensuring total traceabil-
ity in real-time at the batch level, the project rigorously complies
with the high regulatory demands of the global pharmaceutical
industry, guaranteeing strict control over biosafety / biosecurity,
expiration, and quality assurance.
2. Technical and Operational Characteristics of the Contribution
The viability and solidity of this impact are based on a robust
technological architecture and profound functional integration,
divided into four fundamental axes:
Robust
Batch-Level
Traceability:
Through
the
reengineering
of the central system (Mistral), the entry (receiving and claim
reports) and exit (delivery notes, returns, exits to Work Order,
transfers, and stock transfers) operations were comprehensively
modied to operate under strict batch control. This also allows
for the intelligent relocation of supplies in the warehouse, opti-
mizing physical space and prioritizing products based on their
expiration date.
Automatic
Identication
and
Mitigation
of
Human
Error:
The
physical basis for traceability was implemented through the gen-
eration and printing of DataMatrix smart labels for products and
64
Towards Inventory Management 4.0: Integration of
Digital Technologies in Cuba's Biopharmaceutical Supply Chain
Zuleyka Calzado Mesa, M. Sc., Gabriela Ojeda de la Paz, Eng., and Damián Aldait García Pérez, Eng.
pp. 56 - 67
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
barcodes for location coding. This ecosystem automatically cap-
tures information, eliminating delays and drastically reducing hu-
man errors associated with manual records.
Mobility and Ubiquity on the Ground: The development of a na-
tive mobile application for Android provides operators with an
agile tool that remotely and in a guided manner replicates all the
operations of the central system. The app acts as a crucial and
immediate bridge between the physical world (warehouse labels)
and the management system, directly guaranteeing data integrity
at the point of operation.
"System of Systems" Architecture and Advanced Infrastructure:
The connectivity support was designed over passive optical net-
works with GPON (Gigabit Passive Optical Network) technology.
On this basis, a uid software ecosystem was structured where
dierent components (Mistral + Android App + Mule ESB) trans
-
parently
communicate
and
in
an
integrated
manner,
achieving
perfect synchronization of logistics information.
Conclusions
The project achieved the technological modernization and digital
transformation of logistics management in supply warehouses through
three
interconnected
fundamental
pillars:
the
reengineering
of
the
central Mistral system, the deployment of a native Android mobile ap-
plication, and the support of an advanced network infrastructure with
GPON technology. The reengineering of the central system to operate
at the batch level, together with the introduction of DataMatrix smart
labels, allowed for the establishment of rigorous, real-time traceabil-
ity control over supplies. This advancement is critical for drastically
mitigating human error in manual records, optimizing physical storage
space, and guaranteeing the strict biosafety regulations, expiry con-
trol, and quality assurance required in the international pharmaceuti-
cal sector.
Despite the positive results in operational eciency, the study pres
-
ents limitations associated with its initial scope, having been imple-
mented as a validation in the ETI warehouse. The success of this initial
65
Towards Inventory Management 4.0: Integration of
Digital Technologies in Cuba's Biopharmaceutical Supply Chain
Zuleyka Calzado Mesa, M. Sc., Gabriela Ojeda de la Paz, Eng., and Damián Aldait García Pérez, Eng.
pp. 56 - 67
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
phase raises the immediate need to scale the solution to the rest of the
units and laboratories of BioCubaFarma company, which will require
the homogenization of the network infrastructure and the continuous
training of operational personnel on the warehouse oor.
As future work, the expansion of the digital ecosystem is projected
through the integration of distributed ledger technologies (blockchain)
to strengthen the immutability of the drug custody chain. Likewise,
the incorporation of predictive intelligence models aimed at anticipat-
ing supply demand curves and proactively optimizing batch expira-
tion alerts is planned, thus consolidating the organization's denitive
transition towards the paradigms of Industry 4.0.
References
Al-Sartawi, M., & Hassanzadeh, A. (2023). Digitalization enhancement in the
pharmaceutical supply network using a supply chain risk management
approach.
Scientic Reports
, 13(1), Artículo 22314. https://doi.org/10.1038/
s41598-023-49216-7
Alemán Rodríguez, A. (2013).
Procedimiento para la clasicación y propuesta
de métodos de inventario para los productos de la Sucursal Emprestur SA Villa
Clara
(Tesis de maestría). Universidad Central “Marta Abreu” de Las Villas,
Santa Clara, Cuba.
Android Developers. (2026).
Android API guidelines and core framework
architecture
. Google Developer Documentation. https://developer.android.
com/
Cespón Castro, R. (2012).
Administración de la Cadena de Suministro
. Editorial
Feijóo, Universidad Central “Marta Abreu” de Las Villas.
Charles, V., & Tasnim, N. (2025). The integration of blockchain and predictive
analytics for secure and transparent batch traceability in pharma supply
chains.
International Journal of Production Research, 63
(2), 401-419. https://
doi.org/10.1080/00207543.2024.2389104
Colectivo de autores. (2018).
La gestión de stock
(Cap. 5). McGraw-Hill
Interamericana de España. https://www.mheducation.es/bcv/guide/
capitulo/8448612124.pdf
Colectivo de autores. (2019a). Diseño de una metodología para la
estandarización de los sistemas de codicación y clasicación de productos
en empresas cubanas.
Ingeniería Industrial, 40
(2), 114-124. https://www.
redalyc.org/jatsRepo/4096/409659500005/html/index.html
66
Towards Inventory Management 4.0: Integration of
Digital Technologies in Cuba's Biopharmaceutical Supply Chain
Zuleyka Calzado Mesa, M. Sc., Gabriela Ojeda de la Paz, Eng., and Damián Aldait García Pérez, Eng.
pp. 56 - 67
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
Colectivo de autores. (2019b).
La Gestión de Inventario como proceso clave
en el sistema empresarial
. Contraloría General de la República de Cuba.
https://www.contraloria.gob.cu/sites/default/les/articulos/2019-12/La%20
Gestion%20de%20Inventario%20como%20proceso%20clave.pdf
Jagtheesan, S., & Shashi, K. (2023). Digital transformation in pharmaceutical
supply chains: A qualitative study of strategic implementation approaches for
enhanced eciency.
Journal of Pharmaceutical Innovation
, 18(4), 512-526.
https://doi.org/10.1007/s12247-023-09743-4
Lewandowska, M., & Koliński, A. (2023). Intelligent Warehouse in Industry
4.0—Systematic Literature Review.
Sensors, 23
(8), Artículo 4105. https://doi.
org/10.3390/s23084105
Microsoft Corporation. (2025).
C# Language Specication and .NET Framework
architecture documentation
. Microsoft Learn. https://learn.microsoft.com/en-
us/dotnet/csharp/
Microsoft Corporation. (2026). SQL Server technical documentation: Relational
database engine. Microsoft Learn. https://learn.microsoft.com/en-us/sql/sql-
server/
MuleSoft. (2024). Anypoint Platform and Mule Enterprise Service Bus solutions
architecture guide. Salesforce. https://www.mulesoft.com/
Nathan, I. (2022). Windows Presentation Foundation Development: Architecture
and patterns for desktop applications (2da ed.). Apress.
Schildt, H. (2022). Java: The Complete Reference (12da ed.). McGraw-Hill
Education.
Schroeder, R. (1992). Administración de operaciones: Toma de decisiones en la
función de operaciones (3ra ed.). McGraw-Hill Interamericana.
Sharma, R., & Singh, S. (2023). A comprehensive study on Industry 4.0 in the
pharmaceutical industry for sustainable development. Environmental Science
and Pollution Research, 30(22), 61205-61218. https://doi.org/10.1007/
s11356-023-26853-x
Stallings, W. (2021). Operating Systems: Internals and Design Principles (9na
ed.). Pearson. [Sustenta el uso de plataformas tipo Debian/Windows Server a
nivel de infraestructura].
67
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
1*
Master degree, Commercial Specialist, Project Department, Consulting
Directorate. DCCH. noel.rojas@etecsa.cu
2
Master degree, Head of Project Department, Consulting Directorate. DCCH.
liban.dearmas@etecsa.cu
Abstract
This study presented a methodological model for diagnosing dig-
ital
security
maturity,
geared
towards
institutions
with
diverse
or-
ganizational structures. The objective was to develop a tool capable
of
identifying
gaps,
prioritizing
actions,
and
aligning
digital
secu-
rity with institutional objectives and those of the Policy for Digital
Transformation, the Cuban Digital Agenda, and the Articial Intel
-
ligence Strategy. The approach combined a modular assessment ma-
trix, strategic interviews, and a customized roadmap. The proposal was
structured around nine dimensions: digital leadership, digital work-
place, technologies, information and communication, digital security
policies and strategies, digital operations, digital culture and climate,
cloud migration, legal and regulatory frameworks, and digital skills.
Qualitative techniques and ordinal scales were applied to construct
contextualized maturity proles, which activated processes of internal
reection and strategic planning. The results obtained from its appli
-
cation can reveal vulnerability patterns such as the absence of formal
pp. 67 - 82
Received: 01/2026 | Accepted: 03/2026 | Published: 07/2026
Methodology for the Digital Security
Maturity Assessment Test for
Consulting Services
Noel Emilio Rojas Martos, M. Sc.
¹*
, Liban de Armas Granado, M. Sc.
²
R
E
S
E
A
R
C
H
Methodology for the Digital Security Maturity Assessment Test for Consulting Services
Noel Emilio Rojas Martos, M. Sc., and Liban de Armas Granado, M. Sc.
pp. 67 - 82
68
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
policies, a weak reporting culture, and dependence on individual ac-
tors. At the same time, sustainable improvement opportunities were
identied,
achievable
without
complex
technical
requirements.
The
roadmap outlined phased actions, adaptable to each institutional con-
text. The model demonstrated the capacity not only to diagnose but
also to enable organizational transformation processes. Its application
can foster institutional strengthening, prepare for external audits, and
integrate digital security as a strategic component. Its incorporation as
a foundational phase in continuous improvement and digital transfor-
mation processes is proposed.
Keywords:
diagnosis; dimensions; model; transformation; security
Introduction
This study developed a methodological model for diagnosing digi-
tal security maturity geared towards institutions with diverse organiza-
tional structures. Its objective is to facilitate the identication of gaps,
prioritize improvement actions based on the institutional level, sup-
port secure digital transformation processes, facilitate alignment with
regulatory frameworks and international standards, and align digital
security with institutional objectives, in line with the Policy for Digital
Transformation, the Cuban Digital Agenda, and the Articial Intelli
-
gence Strategy.
The evolution of information protection at the international level
has given rise to a series of key concepts that transcend the techni-
cal defense of systems and data, and which today constitute pillars
for assessing institutional maturity (Von Solms & Van Niekerk, 2013).
Among these concepts, we highlight those most relevant to the design
and application of assessment models:
1.
Cyber resilience:
the ability of an organization to anticipate,
withstand, recover from, and adapt to cyber incidents (ITU, ENI
-
SA, NIST). Application in the model: Incorporated through indica-
tors of operational continuity, crisis management, organizational
learning, and adaptive exibility.
Methodology for the Digital Security Maturity Assessment Test for Consulting Services
Noel Emilio Rojas Martos, M. Sc., and Liban de Armas Granado, M. Sc.
pp. 67 - 82
69
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
2.
Digital security as a national capability:
digital security is a
strategic
capability
involving
legislation,
infrastructure,
educa-
tion, cooperation, and governance (Global Cybersecurity Index
[ITU]). Application in the model: It enables mapping institutional
alignment with national policies, sectoral strategies, and regula-
tory frameworks.
3.
Socio-technical
approach:
digital
security
is
a
phenomenon
combining technology, people, processes, and culture (Von Solms
& Van Niekerk). Application in the model: Justies the inclusion of
dimensions such as leadership, organizational culture, risk percep-
tion, and internal communication.
4.
Multi-level
governance:
digital
security
requires
coordina-
tion among local, national, and international actors, both public
and private (UN Convention on Cybercrime [2024], EU and Lat
-
in American Cybersecurity Strategies). Application in the model:
Evaluates institutional participation in collaborative networks,
regulatory interoperability, and inter-institutional coordination
capacity.
5.
Digital maturity and security by design:
digital security must
be integrated from the design phase of processes, systems, and
policies (ISO/IEC 27001, NIST Cybersecurity Framework). Appli
-
cation in the model: Diagnoses whether digital security is struc-
turally incorporated or responds to a reactive logic.
The incorporation of these concepts allows the assessment model
to transcend a technical audit and become a strategic tool for insti-
tutional transformation. By evaluating the nine dimensions covered
by the assessment under study (digital leadership, digital workplace,
technologies, information and communication, digital security pol-
icies
and
strategies,
digital
operations,
digital
culture
and
climate,
cloud migration, legal and regulatory frameworks, and digital skills),
it
positions
itself
as
an
instrument
aligned
with
international
best
practices and adaptable to national contexts.
The research was based on theoretical and methodological contri-
butions from authors such as Von Solms and Van Niekerk (2013), who
expanded
the
concept
of
digital
security
beyond
technical
aspects;
Methodology for the Digital Security Maturity Assessment Test for Consulting Services
Noel Emilio Rojas Martos, M. Sc., and Liban de Armas Granado, M. Sc.
pp. 67 - 82
70
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
Siponen
and
Pahnila
(2018),
who
addressed
organizational
compli
-
ance with security policies; Cuban regulations including Decree-Law
78/2023 "On the security and protection of classied and restricted in
-
formation", Decree 104/2024 "Regulations for the security and protec
-
tion of classied and restricted information", Decree 360/2019 "On ICT
security and the defense of national cyberspace", Resolution 128/2019
"ICT Security Regulations", Resolution 105/2021 "Regulations on the
national action model for cyber incident response"; and international
frameworks such as the NIST Cybersecurity Framework (National In
-
stitute of Standards and Technology [NIST], 2018), ISO/IEC 27001 and
27002, and CIS Controls. The proposed assessment also enabled orga-
nizational transformation processes through a phased, adaptable, and
action-oriented roadmap.
Materials and Methods
This research paper proposes a digital security maturity assessment
for consulting services focused on digital transformation. To this end,
it was necessary to conduct an approach to the theoretical framework
and the state of the art of the main concepts and models associated
with
cybersecurity,
as
well
as
an
analysis
of
regulations,
standards,
and publication recommendations from the ITU, cybersecurity com-
panies, Cuban regulations related to the research topic, and identied
trends and best practices. The research was supported by bibliograph-
ical sources from a broad range of stakeholders (regulators, operators,
consultants, academics).
Through the assessment , the aim is to facilitate the identication
of vulnerabilities associated with digital security and other intangible
capabilities across budgeted and enterprise sectors, as well as other
economic players interested in the digital transformation process. It
offers
the
possibility
of
diagnosing
the
level
of
digital
security
maturity,
drawing
a
strategic
roadmap
for
the
qualitative
and
quantitative
improvement
of
its
management,
and
increasing
its
outcomes.
The
assessment
has
practical
implications
because
it
constitutes
one of the pillars of the project for the design and implementation
of consulting services at the Telecommunications Company of Cuba
Methodology for the Digital Security Maturity Assessment Test for Consulting Services
Noel Emilio Rojas Martos, M. Sc., and Liban de Armas Granado, M. Sc.
pp. 67 - 82
71
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
(ETECSA, in Spanish), making a contribution to Cuban society based
on implemented best practices; it can also have a positive impact on
the
country's
digital
transformation
process.
The
economic
benet
is estimated based on savings from import substitution, derived from
the company's in-house design and the intrinsic value of information,
without the need for external consulting services.
This research combined theoretical and statistical-mathematical
methods. From a theoretical perspective, the search, identication,
and
review
of
relevant
literature
were
conducted
to
gather
key
information.
Analysis
and
synthesis
were
applied
to
all
consulted
specialized
literature
from
subject
matter
experts,
cybersecurity
companies, consulting rms, and international organizations, among
others.
Systemic approaches were employed to ensure the integration, in-
terrelation, interdependence, and synergy of the dimensions that con-
tribute to the overall assessment. The method of moving from what is
abstract to what is complex was implemented, and a system of concep-
tual abstractions was developed for each dimension, along with levels
of analysis that enabled a study progressing from general to specic
aspects in order to obtain a comprehensive picture of the process.
With the historical-logical method, it was possible to contextualize
the subject of study within history and its evolution, from the emergence
of cybersecurity as a science to the present day. Empirical methods
such as literature review were used, through which a broad bibliography
related
to
the
proposed
objective
was
accumulated,
followed
by
selection, critical review, and summary to draw conclusions. Scientic
observation
was
used
to
study
the
practical
experience
of
various
cybersecurity
assessments
and
the
results
of
their
implementation,
enabling
the
formulation
of
the
problem,
hypothesis
testing,
and
projecting the social impact of the solution based on the widespread
application of the assessment.
The research led to the development of a specic test (checklist) as
an instrument to measure the level of digital security maturity, serving
as a tool to diagnose the current state of agencies, enterprises, and or-
ganizations.
Methodology for the Digital Security Maturity Assessment Test for Consulting Services
Noel Emilio Rojas Martos, M. Sc., and Liban de Armas Granado, M. Sc.
pp. 67 - 82
72
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
Results and Discussion
The digital security maturity assessment is based on the best prac-
tices of the Global Cybersecurity Index (GCI), published by the In
-
ternational Telecommunication Union (ITU). Furthermore, it is part
of
the
TETR4DIG
technology
(Organizational
Change
Management
Model Focused on Digital Transformation [De Armas Granado & Díaz
Monjiotti, V2: 2022]) (Figure 1).
This assessment evaluates organizational commitment to digital se-
curity according to the ve pillars of the Global Cybersecurity Agen
-
da: legal, technical, and organizational measures, as well as capacity
building and cooperation (Center for Internet Security [CIS], 2021). In
addition, it corresponds with the eight strategic axes of the Policy for
Digital Transformation, the Cuban Digital Agenda, and the Articial
Intelligence Strategy. Regarding its methodology, it is designed in the
form of a test (checklist-style survey) for each of the dimensions.
Its objectives are to identify strengths and weaknesses in the orga-
nization's infrastructure; to identify risks and vulnerabilities; to create
an action plan to improve digital security maturity, including short-,
medium-, and long-term goals; to foster awareness and a culture of
digital security; and to prepare the organization for compliance with
approved national standards and policies.
To carry out the assessment , nine dimensions were identied that
form part of the Digital Security Model (see Figure 2) presented during
Figure 1.
TETR4DIG: Organizational Change Management Model Focused on Digital
Transformation (de Armas Granado, Liban; Díaz Monjiotti, Ela. 2022)
Methodology for the Digital Security Maturity Assessment Test for Consulting Services
Noel Emilio Rojas Martos, M. Sc., and Liban de Armas Granado, M. Sc.
pp. 67 - 82
73
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
the events "Cybersecurity in Telecommunications 2023" and "XVI Ibe
-
ro-American Seminar on Information Technology Security 2024".
Model Structure and Denition of Dimensions
Based on the rationale of the assessment, a review of Cuban reg-
ulations,
international
frameworks,
and
the
conceptualization
of
TETR4DIG technology, an assessment tool was designed to evaluate
the degree of advancement, integration, and sustainability of digital
security in institutional environments.
These dimensions are not conceived as isolated elements, but as
interdependent components forming a secure, resilient, and develop-
ment-oriented
digital
ecosystem.
The
graphic
representation
of
the
model (centered on the concept of 'Digital Security' as an articulating
core) visualizes the systemic relationship among leadership, policies,
technology, culture, skills, and regulatory frameworks.
Each dimension responds to specic evaluation criteria and di
-
rectly links to the strategic axes of the Cuban Policy for Digital Trans-
formation, ensuring the contextual relevance of the instrument and
its capability to guide continuous improvement processes, strategic
planning, and regulatory compliance. The evolution of all dimensions
represents a strategic component contributing to the strengthening of
institutional digital security, and their evaluation identies the level
of maturity, integration, and alignment with policy axes. The mean-
ing and scope of each evaluated dimension in the test is described
below:
Figure 2.
Digital Security Model Based on TETR4DIG Technology.
(Rojas Martos, Noel E. 2024)
Methodology for the Digital Security Maturity Assessment Test for Consulting Services
Noel Emilio Rojas Martos, M. Sc., and Liban de Armas Granado, M. Sc.
pp. 67 - 82
74
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
Digital leadership:
It assesses senior management's commitment
to cybersecurity as a key driver of institutional transformation. It in-
cludes the existence of clear policies, assignment of responsibilities,
and
strategic
decision-making
capability.
Mature
leadership
drives
digital
governance
and
promotes
an
organizational
culture
oriented
toward resilience.
Digital security policies and strategies:
it analyzes the presence,
updating, and application of institutional policies related to cyberse-
curity, data protection, and risk management. It determines whether
these policies are aligned with national and international regulatory
frameworks and integrated into organizational strategic planning.
Digital
workplace:
It
assesses
the
degree
of
work
environments
digitalization. It includes the use of technological tools, process auto-
mation, and secure access to digital platforms. It also includes training
for sta on the responsible and safe use of digital resources.
Information and Communication Technologies (ICTs):
It exam-
ines available technological infrastructure, its level of interoperability,
connectivity, and capacity to enable secure digital services. It includes
technological asset management, system updates, and implementation
of innovative solutions.
Culture and digital climate:
It measures the level of awareness,
participation, and trust of institutional actors in the digital environ-
ment. It evaluates the existence of awareness campaigns, inclusive
practices, and mechanisms to foster digital values such as responsi-
bility, ethics, and collaboration.
Legal and regulatory frameworks:
It determines the organization's
degree of compliance with current regulations on data protection, dig-
ital identity, cybersecurity, and articial intelligence. It includes the
existence of audit mechanisms, legal control, and regulatory adapta-
tion.
Cloud migration:
It explores the use of emerging technologies,
particularly
cloud
computing,
as
a
strategy
to
improve
eciency,
scalability, and security of digital services. It addresses issues such as
supplier management, data protection in virtual environments, and
business continuity.
Methodology for the Digital Security Maturity Assessment Test for Consulting Services
Noel Emilio Rojas Martos, M. Sc., and Liban de Armas Granado, M. Sc.
pp. 67 - 82
75
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
Digital
operations:
It
evaluates
the
transformation
of
internal
processes and public services through digital platforms, online pro-
cedures, and one-stop shops. It measures operational eciency, user
experience, and institutional responsiveness in digital environments.
Digital skills:
It analyzes training, updating, and development of
digital competencies among institutional sta. It includes knowledge
in ICT, cybersecurity, articial intelligence, and data management, as
well as the existence of continuous training programs.
The analysis obtained through the digital security maturity assess-
ment test reveals an institutional structure that, while having advanced
in adopting technologies and digital policies, still faces challenges in the
systemic integration of security as a cross-cutting axis. The analytical
matrix and dimensional model make it possible to identify strengths in
areas such as ICT infrastructure and digital operations, as well as gaps
in strategic leadership, organizational culture, and digital skills.
The correspondence between the evaluated dimensions and the
strategic
axes
of
the
Cuban
Policy
for
Digital
Transformation
vali-
dates the contextual relevance of the model. This makes it possible
to position it as a methodological tool capable of guiding continuous
improvement processes, institutional planning, and regulatory com-
pliance.
Furthermore,
by
incorporating
socio-technical
approaches
and digital governance principles, the assessment transcends techni-
cal auditing and it becomes an instrument for organizational transfor-
mation. This analysis not only helps characterize the current state of
digital security in the institutions evaluated, but also provides prac-
tical input for strategy development, decision-making, and capacity
building, with a view toward a secure, inclusive, and sustainable digital
transformation.
Articulation of the Assessment Model With the Cuban Policy for
Digital Transformation
The results of the digital security maturity assessment were orga-
nized into a matrix linking each evaluated dimension to the strategic
axes
dened
in
the
“Cuban
Policy...”
This
articulation
validates
the
model's relevance in the national context and demonstrates its capac-
ity to operationalize the public policy's guiding principles. The matrix
Methodology for the Digital Security Maturity Assessment Test for Consulting Services
Noel Emilio Rojas Martos, M. Sc., and Liban de Armas Granado, M. Sc.
pp. 67 - 82
76
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
Table 1.
Linkage of dimensions with the Policy for Digital Transformation, the Cuban Digital
Agenda, and the Artificial Intelligence Strategy and its Eight Strategic Axes.
Source: Authors' elaboration
reveals a direct correspondence between the model's dimensions and
the policy's strategic components, as shown below (Table 1):
Methodology for the Digital Security Maturity Assessment Test for Consulting Services
Noel Emilio Rojas Martos, M. Sc., and Liban de Armas Granado, M. Sc.
pp. 67 - 82
77
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
The correlation between the model’s dimensions and the strategic
pillars of Cuban policy conrms that the assessment not only evalu
-
ates the current state of institutional cybersecurity but also guides its
alignment
with
national
objectives.
This
contextual
validation
rein-
forces the model's utility as a tool for strategic planning, continuous
improvement, and accountability.
Furthermore, the matrix shows that digital security is not limited
to technical aspects, but spans leadership, culture, skills, regulations,
and processes, in alignment with multi-level governance and socio-
technical approaches promoted internationally. In this sense, the model
contributes to positioning digital security as a comprehensive axis of
institutional transformation.
Requirements Measured by the Test for Each Dimension
In order to implement the digital security maturity assessment
model,
a
set
of
160
items
was
designed
across
the
nine
strategic
dimensions. Each item represents a specific requirement evaluating
the
degree
of
compliance,
integration,
and
sustainability
of
institutional practices, policies, and capabilities in digital security.
These
requirements
were
formulated
based
on
a
critical
review
of
Cuban
regulations
and
international
frameworks
described
earlier, as well as digital governance principles and guidelines of
the “Cuban Policy...” Likewise, socio-technical, organizational, and
regulatory criteria were incorporated to capture the complexity of
the institutional digital environment.
The test structure follows a modular logic, where each dimension
groups requirements ranging from technical and regulatory aspects to
cultural, operational, and strategic factors. This organization facilitates
the application of the instrument across dierent institutional types,
enables the identication of specic gaps, and guides the formulation
of contextualized improvement plans. Table 2 presents the require-
ments evaluated for each dimension along with a brief description jus-
tifying their inclusion and assessment relevance:
Methodology for the Digital Security Maturity Assessment Test for Consulting Services
Noel Emilio Rojas Martos, M. Sc., and Liban de Armas Granado, M. Sc.
pp. 67 - 82
78
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
Table 3 summarizes the main components of the test, where each
dimension groups a set of items evaluating practices, capabilities, and
institutional policies linked to digital security. In addition to the num-
ber of evaluated items, key recommendations are included to guide the
interpretation of results and the formulation of improvement actions
according to the identied maturity level.
Table 2.
Requirements Evaluated for Each Dimension, Accompanied by a Brief Description
Justifying Their Inclusion and Assessment Relevance. Source: Authors' elaboration
Methodology for the Digital Security Maturity Assessment Test for Consulting Services
Noel Emilio Rojas Martos, M. Sc., and Liban de Armas Granado, M. Sc.
pp. 67 - 82
79
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
Application and Interpretation of the Test
The digital security maturity assessment test can be applied through
a combination of semi-structured interviews, document review, and
direct
observation,
adapted
to
the
organizational
characteristics
of
each evaluated institution. The 160 items distributed across the nine
dimensions allow for a modular, exible, and contextualized assess
-
ment, facilitating the identication of strengths, gaps, and improve
-
ment opportunities.
Each item is evaluated on an ordinal scale reecting the degree of
institutional compliance, allowing results to be classied into four ma
-
turity levels using the assessment system proposed by TETR4DIG tech
-
nology as a reference:
Basic:
Undocumented digital security processes, in constant change,
arranged ad hoc in a reactive manner.
Table 3.
Summary table synthesizing the nine dimensions of the digital security maturity
assessment test, the number of evaluated items in each, and key recommendations
according to expected results. Source: Authors' elaboration
Methodology for the Digital Security Maturity Assessment Test for Consulting Services
Noel Emilio Rojas Martos, M. Sc., and Liban de Armas Granado, M. Sc.
pp. 67 - 82
80
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
Initial:
Digital security processes executed uniformly with consis-
tent results; implementation of digital security measures has begun in
some areas of the entity.
Strategic:
Strategically integrated digital security processes. Imple-
menting a digital security roadmap holistically and integrally, oriented
toward company resources and clients, with standardized, dened, and
documented processes undergoing periodic review.
Innovative-disruptive:
Digital security processes for data and in-
formation
protection
at
the
forefront;
consolidated
digital
leader-
ship; continuous improvement of eectiveness through technological
change and innovation; and agile, innovative, exible, connected, col
-
laborative, open processes using relevant data protected across multi-
ple technological mediums. Continuously adapting to changes.
This classication enables the construction of maturity proles per
dimension, identication of common patterns among institutions, and
guidance for formulating specic improvement plans. In addition, it
facilitates longitudinal comparison and assessment of the impact of
strategic digital security interventions.
Conclusions
This article has proposed a digital security maturity assessment mod-
el specically designed for institutional consulting services. Grounded
in a socio-technical and interdisciplinary approach, the model allows
evaluating the degree of integration, sustainability, and strategic align-
ment of digital security in public and private organizations, aligned
with the strategic axes of the Cuban Policy for Digital Transformation
and international reference frameworks (ISO/IEC 27001, NIST, ITU).
The modular structure of the assessment (composed of nine strate
-
gic dimensions and 160 evaluative items) facilitates a comprehensive
characterization of the institutional digital environment, ranging from
leadership and organizational culture to technological infrastructure,
regulatory policies, and sta skills. This breadth makes it possible to
identify specic gaps, guide improvement plans, and strengthen orga
-
nizational capabilities toward a secure, inclusive, and resilient digital
transformation.
Methodology for the Digital Security Maturity Assessment Test for Consulting Services
Noel Emilio Rojas Martos, M. Sc., and Liban de Armas Granado, M. Sc.
pp. 67 - 82
81
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
The
results
obtained
demonstrate
that
digital
security
cannot
be
approached
as
an
isolated
technical
component,
but
rather
as
an
integral
process
requiring
committed
leadership,
effective
governance,
continuous
training,
and
regulatory
articulation.
In
this regard, the model positions itself as a valuable methodological
tool
for
consultants,
managers,
and
institutional
leaders
seeking
to
integrate
digital
security
into
their
planning,
evaluation,
and
decision-making processes.
Its application does not replace cybersecurity services currently in
the portfolio of the Consulting Directorate; rather, it identies weak
-
nesses and opportunities so that these services can be contracted by
those conducting the assessment . In conclusion, the potential of the
assessment as a longitudinal monitoring instrument, adaptable to di-
verse sectoral contexts and scalable according to technological and
regulatory advances, is highlighted. Its systematic application can con-
tribute to strengthening security culture, improving institutional qual-
ity, and achieving strategic digital transformation objectives in Cuba
and similar environments.
It is recommended to conduct an analysis of the indicators for each
dimension comprising the digital security model, so that the assess-
ment can be contracted by international organizations as part of con-
sulting services.
References
De Armas Granado, L., Díaz Monjiotti, E., & Tito Bertor, A. (2021).
De la
ciberseguridad a la seguridad digital en los servicios de consultoría de la
Empresa de Telecomunicaciones de Cuba S.A
. En III Taller de Ciberseguridad
“Bienestar para todos”. La Habana: ETECSA.
D’Antonio, G., & Olías de Lima, P. M. (2019).
Digital security en la nueva era de
transformación digital
. Madrid: Real Instituto Elcano.
Decreto 104/2024. (2024).
Reglamento de la seguridad y protección de la
información clasicada y limitada
. Gaceta Ocial de la República de Cuba.
Decreto 360/2019. (2019).
Sobre la seguridad de las TIC y la defensa del
Ciberespacio Nacional.
Gaceta Ocial de la República de Cuba.
Methodology for the Digital Security Maturity Assessment Test for Consulting Services
Noel Emilio Rojas Martos, M. Sc., and Liban de Armas Granado, M. Sc.
pp. 67 - 82
82
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
Decreto-Ley 78/2023. (2023).
Sobre la seguridad y protección de la información
clasicada y limitada
. Gaceta Ocial de la República de Cuba.
ISO/IEC 27001. (2013).
Information technology – Security techniques –
Information security management systems
– Requirements. Geneva:
International Organization for Standardization.
ISO/IEC 27002. (2013).
Information technology – Security techniques – Code of
practice for information security controls
. Geneva: International Organization
for Standardization.
National Institute of Standards and Technology (NIST). (2018).
Framework for
improving critical infrastructure cybersecurity
(Version 1.1). Gaithersburg, MD:
U.S. Department of Commerce.
Observatorio de la Ciberseguridad. (s. f.).
Indicador de madurez en
ciberseguridad
. Recuperado de https://observatoriociberseguridad.org
Política para la Transformación Digital, la Agenda Digital Cubana y la Estrategia
de Inteligencia Articial
. Ministerio de Comunicaciones, 2024.
Resolución 105/2021. (2021).
Reglamento sobre el Modelo de Actuación
Nacional para la Respuesta a Incidentes de Ciberseguridad
. Gaceta Ocial de la
República de Cuba.
Resolución 128/2019. (2019).
Reglamento de Seguridad de las TIC
. Gaceta
Ocial de la República de Cuba.
Rojas Martos, Noel E.
Modelo de Seguridad Digital basado en la tecnología
TETR4DIG
. III Taller de Ciberseguridad. La Habana: ETECSA. XVI Seminario
Iberoamericano de Seguridad en las Tecnologías de la Información” (Palacio
de las Convenciones. Cuba. 2024).
Siponen, M., & Pahnila, S. (2018). Hacia un modelo unicado de cumplimiento
de la política de seguridad de la información.
Revista de Seguridad
Informática
. 34 (2), 45–62.
Solms, B. von, & van Niekerk, J. (2013). From information security to cyber
security.
Computers & Security
, 38, 97–102.
83
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
1*
Vladimir Ilich Lenin High School Vocational Institute of Exact Sciences
2
Empresa de Telecomunicaciones de Cuba. VPEM. ivette.garcia@etecsa.cu
Abstract
This article, derived from the research seminar developed within the
framework of the scientic exchange between the "Vladimir Ilich Lenin"
Pre-University
Vocational
Institute
of
Exact
Sciences
and
ETECSA,
analyzes
the
transformative
impact
of
articial
intelligence
(AI)
on
the telecommunications sector. Through a documentary review and a
multiple case study, four structural challenges of the pre-AI era were
identied: manual management of exponential data trac, saturation
of
customer
service,
reactive
infrastructure
maintenance,
and
static
signature-based cybersecurity.
AI-enabled
solutions
are
presented,
such
as
self-optimizing
networks,
chatbots
and
virtual
assistants,
predictive
maintenance,
and real-time anomaly detection systems, documented with success
stories from Google, Telefónica, Nokia, IBM, Movistar, Vodafone, among
others. The discussion compares the previous reactive model with the
current
proactive
and
autonomous
model,
evidencing
quantiable
reductions. It is concluded that AI has moved from being a futuristic
promise to a decisive competitiveness factor, and its strategic adoption
pp. 83 - 92
Received: 01/2026 | Accepted: 03/2026 | Published: 07/2026
The AI Revolution in
Telecommunications: A
Journey from the Past to the Future
Rafael Alberto Noa Yanes
¹*
, Ivette García Montero, Eng.
²
R
E
S
E
A
R
C
H
84
pp. 83 - 92
The AI Revolution in Telecommunications: A Journey from the Past to the Future
Rafael Alberto Noa Yanes, and Ivette García Montero, Eng.
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
is recommended, along with investment in research, development, and
academia-industry partnerships to prepare young talent for the future
of telecommunications.
Keywords:
Articial Intelligence; telecommunications; predictive
maintenance; cybersecurity; network automation
Introduction
Telecommunications have come a long way since the earliest long-
distance
communication
systems:
smoke
signals,
drums,
the
4th
century BC hydraulic telegraph, and the optical telegraph, considered
the
rst
modern
system.
In
the
19th
century,
electric
telegraphy
and,
later,
telephony
laid
the
foundations
of
today's
industry,
with
milestones such as the rst transatlantic cable (1858) and the founding
of iconic companies like the Electric Telegraph Company (1846) and
AT&T
(1885).
Figure
1
visually
summarizes
these
key
moments
and
their
connection
to
the
arrival
of
Articial
Intelligence
(AI).
Today,
however, the challenge is no longer just overcoming physical distance,
but managing the torrent of data owing through networks.
Figure 1.
A Journey from the Past to the Future
This article aims to analyze the transformative impact of Articial
Intelligence (AI) on the telecommunications sector, identifying the main
problems the industry faced before its implementation and showing
how AI has helped to overcome them. The work is framed within the
85
pp. 83 - 92
The AI Revolution in Telecommunications: A Journey from the Past to the Future
Rafael Alberto Noa Yanes, and Ivette García Montero, Eng.
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
scientic exchange between the "Vladimir Ilich Lenin
"
Pre-University
Vocational Institute of Exact Sciences and ETECSA, with the aim of
fostering collaborative innovation and preparing young talent for the
challenges of the digital future.
The specialized literature and reports from leading companies
(Cisco,
Google,
Telefónica,
Nokia,
IBM)
have
documented
signifi
-
cant advances in areas such as network self-optimization, custom-
er service through virtual assistants, predictive maintenance, and
proactive cybersecurity. However, this article does not merely com-
pile these contributions; it organizes them into an analytical frame-
work that helps understand the evolution from a reactive model to an
autonomous, intelligent one. The novelty lies in the systematization of
these case studies and their application to the context of telecom cari-
ers such as ETECSA, where collaboration with educational institutions
drives knowledge transfer and the adoption of advanced technologies.
Materials and Methods
The research was carried out using a qualitative approach, based
on
the
review
and
documentary
analysis
of
specialized
sources.
A
multiple case study methodology was employed, selecting represen-
tative companies from the telecommunications sector that have im-
plemented AI solutions with publicly documented results.
Sources of Information
Technical
reports
and
press
releases
from
leading
companies:
Cisco,
Google,
AT&T,
Telefónica,
Nokia,
Ericsson,
Movistar,
Vodafone, Orange, and Verizon.
Publications from international organizations and academic insti-
tutions, including IBM, the Luca de Tena Journalism Laboratory,
and the Spanish Association of Telecommunications Engineers.
Specialized articles in industry journals and technology platforms
(Metaverso, Minsait, Aunoa).
General
reference
materials
(Google
Cloud)
to
establish
deni
-
tions and historical context.
Procedure
Identication of pre AI challenges: Recurring problems document
-
ed in the literature prior to the massive adoption of AI were analyzed,
86
pp. 83 - 92
The AI Revolution in Telecommunications: A Journey from the Past to the Future
Rafael Alberto Noa Yanes, and Ivette García Montero, Eng.
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
classifying them into four categories: data trac management, cus
-
tomer service, infrastructure maintenance, and cybersecurity.
Selection of success stories:
Companies with mature AI imple-
mentations were selected in each of the four areas, prioritizing
those
that
reported
quantitative
metrics
(reduction
in
outages,
percentage of automated inquiries, decrease in false alarms, etc.).
Comparative analysis:
The “before” and “after” situations of AI
were contrasted for each challenge, extracting the elements that
demonstrate substantial improvement.
Contextualization:
The
ndings
were
integrated
within
the
framework
of
the
scientic
exchange
between
the
"Vladimir
Ilich
Lenin"
Pre-Universitary
Vocational
Institute
and
ETECSA,
highlighting how academia industry collaboration can accelerate
the adoption of these technologies.
Results and Discussion
The Four Challenges of the Pre AI Era: an Analysis of the Struc-
tural Limitations
The documentary analysis conducted made it possible to identify
four recurring problems that characterized the operation of telecom-
munications networks before the massive incorporation of articial
intelligence. These challenges did not act in isolation; rather, they feed
back on each other: manual trac management worsened bottlenecks,
unforeseen failures overwhelmed customer service centers, and reac-
tive security left exposure windows that widened with the exponential
growth of data. Understanding this interrelation is key to appreciating
the transformative impact that AI has had in addressing them compre-
hensively.
1. Exponential Data Growth and Manual Network Management
The rise of mobile phones and the Internet caused an unprecedented
increase in data demand. Every second, demand grows; trac increases
progressively, placing unsustainable pressure on infrastructure not de-
signed for such volume. In regions where AI is not used, operators mon-
itor network performance manually, employ basic automation systems
for device conguration, and perform limited data analysis. This leads
87
pp. 83 - 92
The AI Revolution in Telecommunications: A Journey from the Past to the Future
Rafael Alberto Noa Yanes, and Ivette García Montero, Eng.
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
to so-called “bottlenecks,” which disrupt production and degrade the
user experience. An emblematic case is Verizon, which experienced this
problem in its Customer Service during peak demand periods, resulting
in prolonged wait times and a less satisfactory experience.
2. Saturation of Customer Service
Customer
dissatisfaction
caused
by
bottlenecks
is
funneled
into
call centers, which constantly receive requests, complaints, and ques-
tions. Demand for this service also grows exponentially, but the quality
of attention depends entirely on the experience and knowledge of the
human operator, which requires ongoing training and generates long
wait times. The IBM report cited in the literature notes that, before the
adoption of chatbots, more than 60% of calls corresponded to routine
inquiries, consuming a signicant portion of operational resources.
3. Reactive Maintenance and Delayed Response to Failures
In
the
pre-AI
era,
infrastructure
problems
were
only
detected
through user reports or manual monitoring. This meant technicians
intervened only after receiving complaints or noticing a drop in per-
formance. A paradigmatic example is AT&T, which between 2007 and
2010 faced severe network congestion following the launch of Apple's
iPhone. The infrastructure was not prepared to handle the sudden in-
crease in trac, and the lack of predictive capabilities caused recur
-
ring outages during high-demand events.
4. Static Cybersecurity and Limited Threat Detection
Telecommunications companies built their protection systems on
static rewalls and signature databases. These systems compare net
-
work
trac
against
known
patterns
of
malicious
activity,
but
they
only identify previously recorded attacks and require constant manual
updating. As trac grows progressively, monitoring becomes unsus
-
tainable, generating “false positives” (unnecessary alarms) and “false
negatives” (overlooked threats). This methodology was especially vul
-
nerable to zero-day attacks, such as those experienced during the 2017
WannaCry ransomware outbreak, in which several companies relying
exclusively on signature-based systems suered infections.
Below, in Figure 2, the four systematized challenges are presented,
accompanied by concrete documented examples:
88
pp. 83 - 92
The AI Revolution in Telecommunications: A Journey from the Past to the Future
Rafael Alberto Noa Yanes, and Ivette García Montero, Eng.
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
Figure 2.
The Four Major Telecommunications Challenges Before AI
Table 1.
AI-Enabled Solutions for Each in the Telecommunications Sector
These results show that the traditional model operated reactively,
with human intervention as a bottleneck and structural limitations in
adapting to the rapid growth in demand.
Solutions Enabled by AI
In
a
context
dominated
by
human
intervention,
rigid
systems,
and the inability to anticipate problems, artificial intelligence has
emerged as a technological enabler that radically transforms tele-
communications operations. AI-based solutions are not limited to
automating
repetitive
tasks;
they
introduce
learning
capabilities,
real-time
adaptation,
and
autonomous
decision-making.
The
fol-
lowing table presents the main results documented in the literature
and in reports from pioneering companies, organized according to
the four previously identified challenges (Table 1).
89
pp. 83 - 92
The AI Revolution in Telecommunications: A Journey from the Past to the Future
Rafael Alberto Noa Yanes, and Ivette García Montero, Eng.
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
Discussion: Before and After, a Structural Transformation
The comparison between the pre AI and post AI scenarios reveals
a transformation that goes beyond a mere incremental improvement.
This represents a paradigm shift in the way telecommunications op-
erate, aecting network architecture, customer relationships, and the
ability to respond to contingencies.
This comparison shows that AI not only solves existing problems
but redenes the very nature of operations. It marks a shift from a re
-
active model, where technology acted as passive support to human in-
tervention, to a proactive and autonomous model, where AI is a central
component that anticipates, decides, and executes. The novelty lies
not only in the individual technologies (chatbots, SDN, sensors), but
in their integration into unied management platforms that enable a
closed automation loop: the network detects an anomalous condition,
AI makes a decision, and executes the correction without human inter-
vention.
Furthermore, the cases analyzed demonstrate that this transforma-
tion is scalable and quantiable. The documented percentage reduc
-
tions (30% in outages, 50% in false alarms, 80% in routine inquiries) are
not anecdotal; they reect sustained improvements that directly impact
user satisfaction, operational eciency, and protability. Companies
such as Telefónica, Nokia, and Ericsson have turned these capabilities
into service oerings already used by operators in multiple countries,
validating the technology's maturity.
90
pp. 83 - 92
The AI Revolution in Telecommunications: A Journey from the Past to the Future
Rafael Alberto Noa Yanes, and Ivette García Montero, Eng.
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
Taken together, the gathered evidence conrms that AI has moved
from being a futuristic promise to a decisive competitiveness factor
in the telecommunications sector. Its adoption does not simply mean
incorporating new tools, but reimagining processes and operational
culture to make the most of the capabilities for anticipation, automa-
tion, and continuous learning (Figure 3).
Figure 3.
AI Impact on Telecommunications: From the Reactive Model
to the Proactive/Autonomous Model
Conclusions
This work has achieved the following objectives:
1.
To identify and characterize the four fundamental challenges
that telecommunications faced before the adoption of AI: manu-
al management of exponential trac, saturation of customer ser
-
vice, reactive maintenance, and static cybersecurity.
2.
To demonstrate through documented success stories (Google,
Telefónica, Nokia, IBM, etc.) that AI oers eective solutions, with
quantiable
reductions
in
outages,
false
alarms,
and
operating
costs, as well as substantial improvements in user experience.
3.
To show the shift from a reactive model to a proactive, autono-
mous one, where articial intelligence makes it possible to antici
-
pate problems, automate responses, and free up human talent for
higher-value strategic tasks.
91
pp. 83 - 92
The AI Revolution in Telecommunications: A Journey from the Past to the Future
Rafael Alberto Noa Yanes, and Ivette García Montero, Eng.
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
Contributions
Beyond compiling information, this article systematizes the nd
-
ings into an analytical framework that can serve as a reference for
operators still in the early stages of AI adoption. It also highlights the
importance of partnerships between operators and educational in-
stitutions to train new generations in emerging technologies, such as
those described here.
Future Work
It is suggested to further explore AI applied to 5G and 6G networks,
the Internet of Things (IoT), and the hyperautomation of network op
-
erations
centers.
It
is
also
recommended
to
explore
the
ethical
and
governance challenges associated with intensive AI use, as well as to
develop specic indicators to measure return on investment (ROI) on
AI implementations in contexts such as Cuba, where ETECSA can act
as a catalyst for digital transformation.
References
Asociación Española de Ingenieros de Telecomunicación. (n.d.).
Foro Histórico
de las Telecomunicaciones
. Retrieved from https://www.aeit.es/soyteleco/
grupos-de-trabajo/foro-historico-de-las-telecomunicaciones
Aunoa. (n.d.).
Desafíos y Soluciones en el uso de Chatbots en Telecomunicaciones
.
Retrieved from https://aunoa.ai/blog/desaos-y-soluciones-en-el-uso-de-
chatbots-en-telecomunicaciones
Google Cloud. (n.d.).
¿Qué es una Inteligencia Articial o IA?
Retrieved from
https://cloud.google.com/learn/what-is-articial-intelligence?hl=es-419
International Business Machines Corporation (IBM). (n.d.).
Chatbots
. Retrieved
from https://www.ibm.com/think/topics/chatbots
Laboratorio de Periodismo Luca de Tena. (n.d.).
Cinco lecciones sobre
la evolución de los medios en 40 años: de la maquetación en papel a la
Inteligencia Articial
. Retrieved from https://laboratoriodeperiodismo.org/
cinco-lecciones-sobre-la-evolucion-de-los-medios-en-40-anos-de-la-
maquetacion-en-papel-a-la-inteligencia-articial
Metaverso. (n.d.).
La Revolución de la IA en la Gestión del Tráco de Red:
Soluciones, Casos de Uso y Retos Éticos
. Retrieved from https://metaverso.pro/
blog/la-revolucion-de-la-ia-en-la-gestion-del-traco-de-red-soluciones-
casos-de-uso-y-retos-eticos
92
pp. 83 - 92
The AI Revolution in Telecommunications: A Journey from the Past to the Future
Rafael Alberto Noa Yanes, and Ivette García Montero, Eng.
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
Metaverso. (n.d.).
La Revolución de la IA en el Mantenimiento Predictivo de
Infraestructuras de Telecomunicaciones
. Retrieved from https://metaverso.
pro/blog/la-revolucion-de-la-ia-en-el-mantenimiento-predictivo-de-
infraestructuras-de-telecomunicaciones
Minsait. (n.d.).
IA Aplicada a las Telecomunicaciones
. Retrieved from https://
www.minsait.com/es/insights/ia-aplicada-las-redes-de-telecomunicaciones
Telefónica. (n.d.).
Programa de investigación sobre IA en Telecomunicaciones
.
Retrieved from https://www.telefonica.com/es/sala-comunicacion/blog/
programa-investigacion-ia-industria-telecomunicaciones
93
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
Abstract
Digital
transformation
has
been
essential
for
achieving
success
in organizations, but it goes beyond merely implementing technolo-
gy. This needs a cultural and organizational change. The Information
Technologies (IT) impact is measured according to their alignment
with
business
objectives
and
their
value
to
organizations.
In
Cuba
specically, technological dependence on suppliers complicates the
renewal
of
information
technology
infrastructures,
making
impact
assessment crucial. This research aims to develop a computer system
to reduce the complexity in the process of evaluating the information
technologies impact on organizations. To this end, the Extreme Pro
-
gramming (XP) agile software development methodology, the Django
framework, the Python programming language for the backend, and
HTML5,
CSS3,
and
JavaScript
for
the
frontend
were
applied.
This
solution should assist IT. specialists, workers, and managers in ad-
dressing multiple information security risks and protecting the most
important assets for their organization.
1*
University of Computer Sciences, Cuba, Carretera San Antonio de los Baños
km 2 ½ La Lisa, ernestoeev@uci.cu
2
University of Computer Sciences, Cuba, Carretera San Antonio de los Baños
km 2 ½ La Lisa, mleonb@uci.cu
3
University of Computer Sciences, Cuba, Carretera San Antonio de los Baños
km 2 ½ La Lisa, mary@uci.cu
pp. 93 - 100
Received: 01/2026 | Accepted: 03/2026 | Published: 07/2026
Computer system for evaluating the
InformationTechnologies impact on
organizations
Ernesto Elias Elzaurdín Valdés, Eng.
¹*
, Meliza Leon Bencomo, Ts.
²
,
Mary Nelsa Bonne Cuza, M. Sc.
³
R
E
S
E
A
R
C
H
94
Computer system for evaluating the Information Technologies impact on organizations
Ernesto Elias Elzaurdín Valdés, Eng., Meliza Leon Bencomo, Ts., and Marynelsa Bonne Cuza, M. Sc.
pp. 93 - 100
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
Keywords:
risk
management,
impact
measurement,
computer
system, Information Technologies
Introduction
In
recent
years,
organizations
have
been
committing
themselves
to
digital
transformation
due
to
the
evident
advantages
it
brings
to
business. It is important to highlight that this transformation aims to
achieve benets in terms of information management, processes, re
-
sources, and even the reduction of human errors. However, it is not
merely about implementing new technologies, but about achieving a
cultural and organizational change that guarantees success within or-
ganizations (Liendo Afonso, 2023). It is evident that, once investments
in technological infrastructure are made, their security must be en-
sured, as cyber threats are increasingly prevalent and represent a vul-
nerability for organizations. Therefore, it is necessary to focus eorts
on implementing adequate security measures to reduce the levels of
risk to which information is exposed (Martínez Landrove, 2019).
The growth of Information Technology (IT) infrastructures has led
to a surge in research on their impact on the organizations (Casanova,
Calderón, 2020). The results of various research have identied that the
greater the alignment between IT and business objectives, the broader
the added value that IT infrastructures represent for an organization
(Pérez Lorences, 2014). Impact is measured according to the entity's
mission, making it vital to understand all IT assets.
Each asset holds a specic value, and many are key components
supporting
the
critical
services
provided
to
users.
These
assets
also
directly
inuence
on
the
capital
and
organization
valuation,
and
IT
risks
can
have
a
direct
impact
on
the
budget.
For
every
organization, it is vital and challenging to determine the conditions
that truly impact on the mission. It is very important to continuously
analyze and understand the resources that meet objectives and may
be
compromised
by
Cybersecurity
risks
(Quinn
et
al.,
2022).
An
exploratory study conducted by Casanova (2020) describes the state
of IT infrastructure management in Cuba. This study revealed that
within
organizations,
the
highest
average
impacts
"correspond
to
95
Computer system for evaluating the Information Technologies impact on organizations
Ernesto Elias Elzaurdín Valdés, Eng., Meliza Leon Bencomo, Ts., and Marynelsa Bonne Cuza, M. Sc.
pp. 93 - 100
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
slowness in responding to the organization's needs, which implies a
serious alignment problem" (Casanova, 2020, p. 41). Furthermore, it
highlights "the problems of implementing new systems, due to the
increased management complexity" (Casanova, 2020, p. 41). Cuban
organizations are technologically dependent on their suppliers, which
hinders the periodic and pertinent renewal of IT infrastructures.
Consequently, awareness has arisen regarding the importance of
evaluating the impact on infrastructure. Cuba, as a developing country,
does not produce technology and must therefore import it. This latter
aspect represents a challenge due to the economic blockade. Hence,
impact assessment is of particular importance (Casanova, Calderón,
2020).
To
this
end,
there
are
reference
frameworks
that
generally
describe how to measure the information security impact. However,
these are very generic and must be adapted to the objectives of the
organizations, and there are no tools to help document this analysis.
Therefore, this research focuses on seeking to reduce the complexity
in evaluating the IT impact on organizations through the development
of a computer system. The study is based on the process of evaluating
the IT impact on organizations within the eld of action of computer
systems that carry out this management.
Materials and Methods
The research theoretical design was developed from an analysis of
the main terms and denitions related to impact assessment. Likewise,
a state-of-the-art study was conducted, taking into account analogous
systems. Extreme Programming (XP) was selected as the methodology
due to the characteristics of the software development process. It was
decided to develop the application using the Python v3.9.2 program
-
ming language for the backend and HTML5, CSS3, and JavaScript for
the frontend, with the Django v4.1.3 framework and the PostgreSQL
v11.0.2 database management system.
The theoretical methods used were:
1.
Analytical-synthetic:
for processing information related to im-
pact assessment in / on organizations and reaching the conclu-
sions of the research.
96
Computer system for evaluating the Information Technologies impact on organizations
Ernesto Elias Elzaurdín Valdés, Eng., Meliza Leon Bencomo, Ts., and Marynelsa Bonne Cuza, M. Sc.
pp. 93 - 100
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
2.
Inductive-deductive:
for
the
development
of
the
theoretical
framework of the research.
3.
Systemic-structural-functional:
for
setting
of
the
method-
ological strategy design and the implementation of the impact as-
sessment computer system.
As an empirical method, the interview was used to learn about im-
pact assessment in / on organizations from the client and to clarify the
current state of the IT impact assessment process in / on Cuba. The
research is based on the concept of 'impact on Information Security
management Systems' from ISO 27001. Good practices for risk man
-
agement
and
impact
measurement
dened
by
NIST
(National
Insti
-
tute of Standards and Technology Cybersecurity Framework), the ISO
27000 series, COBIT (Control Objectives for Information and related
Technology),
and
MAGERIT
(Methodology
for
Information
Systems
Risk Analysis and Management) were studied and considered for the
development of the application.
Discussion and Outcomes
To
measure
the
IT
impact
on
organizations,
an
assessment
of IT assets must first be conducted according to their criticality
and importance to the organization. This requires considering the
replacement asset value or the business consequences of the loss
or compromise of those assets. Subsequently, threats are identified,
and
the
probability
of
occurrence
(risk)
is
estimated
(Figure
1).
This information can be obtained from the asset owners or users,
human resources personnel, facility managers, information security
specialists, and other relevant sources. The performers involved in
the IT impact assessment process on organizations are IT specialists,
managers, and business workers.
Figure 1.
Description of the impact measurement process
97
Computer system for evaluating the Information Technologies impact on organizations
Ernesto Elias Elzaurdín Valdés, Eng., Meliza Leon Bencomo, Ts., and Marynelsa Bonne Cuza, M. Sc.
pp. 93 - 100
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
For the design and implementation of the computer system aimed
at evaluating the IT impact on organizations, a web application is pro-
posed, which will be integrated into the company Intranet. This tool
allows to run an IT assets inventory and subsequently estimates the
importance of each asset to the organization through the processing
of a set of criteria entered by the user. Additionally, it will include an
inventory of threats that could aect the organization's assets. It will
have a functionality to estimate the risk for each asset inside the or-
ganization by calculating the total risk each asset faces. It will have a
function to estimate the impact on the company of the possibility that
assets are aected by the threats to which they are exposed. Finally, the
organization's workers will have the possibility to access the system to
assess their level of satisfaction with the company's assets (Figure 2).
Figure 2.
Description of the proposed solution
Fourteen functional requirements, fourteen user stories, and three
CRC (Class, Responsibility, Collaboration) cards were dened, which
describe how to authenticate users in the system, manage assets, man-
age threats, calculate importance, estimate risks, assess services, and
measure social impact. Figure 3 shows, as part of the development pro
-
cess planning, the number of iterations into which the project is divid-
ed. Non-functional requirements for appearance, software, hardware,
security, portability, performance, usability, and maintainability were
also dened.
98
Computer system for evaluating the Information Technologies impact on organizations
Ernesto Elias Elzaurdín Valdés, Eng., Meliza Leon Bencomo, Ts., and Marynelsa Bonne Cuza, M. Sc.
pp. 93 - 100
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
Figure 3.
Development process planning
The
system
development
is
based
on
the
Model-View-Controller
(MVC) architectural pattern. In the case of the Django framework, it
redenes this as Model-View-Template: the view acts as the control
-
ler and the templates act as the views. Regarding design, the following
GRASP patterns were employed: Expert, Creator, Low Coupling, Con
-
troller, and High Cohesion. These describe the essential principles of
object
design
and
responsibility
assignment,
expressed
in
the
form
of patterns. As a data model, the entities Asset, User, and Threat were
proposed. The relationship established between assets and threats is
many-to-many, which gives rise to an additional entity that allows de-
termining the probability of occurrence of certain threats on an asset
(risk) (Figure 4).
Figure 4.
Data model of the solution proposal
99
Computer system for evaluating the Information Technologies impact on organizations
Ernesto Elias Elzaurdín Valdés, Eng., Meliza Leon Bencomo, Ts., and Marynelsa Bonne Cuza, M. Sc.
pp. 93 - 100
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
As a web app, it is based on the customer-server architecture. This
requires a dedicated server to host the information managed by the
system. Customer should access through a navigator. As a web serv-
er, Apache is proposed and connection should be establish through
HTTPS protocol using 443 port. Transport protocol is required to en
-
sure the reliable and secure TCP information provision. Figure 5 shows
necessary components and specications for the solution deployment
/ implementation.
Figure 5.
Solution deployment proposal
Conclusions
Having conducted the research and developed the computer sys-
tem for evaluating the IT impact on organizations, the following con-
clusions can be drawn:
The
systematization
of
the
theoretical-methodological
founda-
tions for measuring the IT impact on organizations helped clarify
the process and thus implement a solution more in line with risk
management and impact measurement standards.
The planning and design of the system allowed for the organiza-
tion of the development process and provided a guide for the im-
plementation of the requirements.
A computer system was implemented that should assist IT special-
ists, workers, and managers of organizations in reducing the com-
plexity in the risk management and impact measurement process.
100
Computer system for evaluating the Information Technologies impact on organizations
Ernesto Elias Elzaurdín Valdés, Eng., Meliza Leon Bencomo, Ts., and Marynelsa Bonne Cuza, M. Sc.
pp. 93 - 100
ISSN: 2224-6274, RNPS: 0514,
Vol. 23, No. 1, january - july, 2026
.
References
Casanova, M. P., & Calderón, C. A. (2020). Modelo para la gestión de
infraestructuras de tecnologías de la información.
Tecnológicas,
23
(48), 32-54. http://www.scielo.org.co/scielo.php?pid=S0123-
77992020000200032&script=sci_arttext
Liendo Afonso, L. C. (2023).
Optimización del proceso de reporting del análisis
de impacto en el negocio en una consultora de ciberseguridad
[Trabajo n de
grado/master, Universidad Europea]. Repositorio institucional. http://titula.
universidadeuropea.com/handle/20.500.12880/5414
Martínez Landrove, N. (2019).
Ciberseguridad y riesgo operacional en
las organizaciones
[Tesis de pregrado o máster, Universidad Ponticia
Comillas]. Repositorio Comillas. https://repositorio.comillas.edu/xmlui/
handle/11531/42317
Pérez Lorences, P. (2014).
Procedimiento para mejorar la gestión de tecnologías
de la información en el sector empresarial cuban
o [Tesis doctoral, Universidad
Central “Marta Abreu” de Las Villas].
Quinn, S., et al. (2022).
Using business impact analysis to inform risk
prioritization and response
(NIST IR 8286D). National Institute of Standards
and Technology (U.S.). https://doi.org/10.6028/NIST.IR.8286D